Lastly, I think that we agree that the use of the following can help with the reduction / elimination of RFI / EMI entering the Endpoint.......as RFI / EMI is known to have detrimental impact on the PCM processing within an 861 or MS600

a) a dedicated Switch for our Sooloos kit;

b) Shielded and Screened SSTP cable for all Sooloos transfers (even a good idea throughout the home network)

c) moving any Wifi Access points as far as possible away from our Endpoints to reduce ambient RFI

d) minimizing the use of Powerline Networking devices throughout our home networks and especially not using Powerline connections to Sooloos Endpoints [as they are known to introduce high RFI levels]

d) the use of Galvanic Isolation (GISO) may also assist when the above "prevention" methods are difficult

So, RFI mitigation and the methods to achieve that is likely something we can agree on

However, we may have to agree to disagree on the impact of Skin Effect, higher SNR or the other phenomena you mention on the Robustness and Integrity of Ethernet Data Transmission

Cheers

-