No the "spotify/streaming" soundeffect was only apparent after I had the GISO GB connected for a few days to the ID41 and suddenly switched back (removed it).

Normally I would say this system really have a very low noisefloor. I do employ linear PSU to both router and switch (Teddy Pardo 12/4). And to the MC200 I have a med. grade SMPS (Teddy Pardo 12/4.5).

What I can't control are my always on PC, NAS, WLAN Printer and Broadband modem. They run with their original wall-warts or built-in SMPS.

I do try to contain mains noise by employing mainsfiltering like 2x Shunyata Triton, and Talos. I'm just mentioning this to give you an idea of what I do use to push noisefloor/distorsion down before entering the home-theater system.


DSP8000SE, DSP7200SEHC, DSP5200SE sides, DSP7200SE rears, 861v8, 210, Sim2 Ultranero 4, Stewart Cinecurve 2.35:1, XEIT CM-5E Anamorphic lens, Dune HD Duo Cinema 8K and Wireworld Platinum 48G HDMI -> UHD722 -> Shunyata Omega Ethernet. Shunyata/Furutech power-cables/filters. SR Master Fuse@861v8. Uptone Etherregen with 10MHz OCXO clock.