Originally Posted by Mark_H
Interesting. Could you give brief instructions? Would actually be interested in trying my 621 after the Radiance for the better handshaking, but cannot lose lipsync options, so this sounds like a possible solution...
Mark,

I can go into more detail as needed, however, in simple terms just map an otherwise unused Meridian input (out of the 12 available) to the same physical source / HD621 connection but with a different delay programmed into the HD621 field within config.

Thus one can have, say, DVD set to 17ms delay, and Freeview set to 10ms. DVD can be Meridian key 'DVD' and Freeview can be Meridian 'TV' for example.

You would need to select the Lumagen input AND the Meridian input in order to change sources - easly done with a controller such as Logitech Touch et al.

Essentially I run all video inputs to a Lumagen Radiance XE, take the one HDMI out to the display and the second HDMI to the HD621 then single coax to 808v5.

I also have a bank of phantom inputs set up with different delays than can be applied to the single in / out of the HD621 as needed without physically changing source.

Only downside to this is that it does consume inputs out of the limited set of Meridian ones available.

Hope this helps

John

808v6, M60, MC200, HD621, Lumagen XE, 504, SB Touch, 563, 201, 204, 208, MPMAX 221, M80, Explorer, Explorer2.