DSP8000.2 Product Firmware Release 2.63 (2014-05-13)

New Features
  • Added Enhanced Bass Alignment.
  • Displays custom legends from SpeakerLink (with compatible controller).
  • Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
  • Boundary control renamed as Position. Must be configured per-speaker.
  • Picks up Position control from SpeakerLink (with compatible controller).
  • Setup changed so that all configuration is available by pressing zero on MSR at power-on.
  • RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential
  • Comms. Fixes to timing and integration.
  • Audio. Cleaner sample rate changes.
  • RS232. Echoes all characters.
  • RS232. Sends "Error" for unknown commands.
  • RS232. Fixed automated reset with WinFup.

DSP7200 Product Firmware Release 2.63 (2014-05-13)

New Features
  • Added Enhanced Bass Alignment.
  • Displays custom legends from SpeakerLink (with compatible controller).
  • Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
  • Boundary control renamed as Position. Must be configured per-speaker.
  • Picks up Position control from SpeakerLink (with compatible controller).
  • Setup changed so that all configuration is available by pressing zero on MSR at power-on.
  • RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential
  • Comms. Fixes to timing and integration.
  • Audio. Cleaner sample rate changes.
  • RS232. Echoes all characters.
  • RS232. Sends "Error" for unknown commands.
  • RS232. Fixed automated reset with WinFup.

DSP7200HC Product Firmware Release 2.63 (2014-05-13)

New Features
  • Added Enhanced Bass Alignment.
  • Added Centre Elevation.
  • Displays custom legends from SpeakerLink (with compatible controller).
  • Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
  • Boundary control renamed as Position. Must be configured per-speaker.
  • Picks up Position control from SpeakerLink (with compatible controller).
  • Setup changed so that all configuration is available by pressing Zero on MSR at power-on.
  • RS232. Added "EA", "CE", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential
  • Comms. Fixes to timing and integration.
  • Audio. Cleaner sample rate changes.
  • RS232. Echoes all characters.
  • RS232. Sends "Error" for unknown commands.
  • RS232. Fixed automated reset with WinFup.

DSP5200 RJ45 Product Firmware Release 2.63 (2014-05-13)

New Features
  • Added Enhanced Bass Alignment.
  • Displays custom legends from SpeakerLink (with compatible controller).
  • Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
  • Boundary control renamed as Position. Must be configured per-speaker.
  • Picks up Position control from SpeakerLink (with compatible controller).
  • Setup changed so that all configuration is available by pressing zero on MSR at power-on.
  • RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential
  • Comms. Fixes to timing and integration.
  • Audio. Cleaner sample rate changes.
  • RS232. Echoes all characters.
  • RS232. Sends "Error" for unknown commands.
  • RS232. Fixed automated reset with WinFup.

DSP5200HC RJ45 Product Firmware Release 2.63 (2014-05-13)

New Features
  • Added Enhanced Bass Alignment.
  • Added Centre Elevation.
  • Displays custom legends from SpeakerLink (with compatible controller).
  • Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
  • Boundary control renamed as Position. Must be configured per-speaker.
  • Picks up Position control from SpeakerLink (with compatible controller).
  • Setup changed so that all configuration is available by pressing Zero on MSR at power-on.
  • RS232. Added "EA", "CE", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential
  • Comms. Fixes to timing and integration.
  • Audio. Cleaner sample rate changes.
  • RS232. Echoes all characters.
  • RS232. Sends "Error" for unknown commands.
  • RS232. Fixed automated reset with WinFup.

Meridian Audio Core 200 Firmware Release v1.10 (2013-12-24)

New Features
  • Source legends may be edited.
  • Source legends may be transmitted via SpeakerLink and displayed on attached speakers.
  • Start volume.
  • Reselecting active source doesn't interrupt audio stream.
  • Dynamically show or hide the Movie/Music mode audio control depending if SpeakerLink is On or Off.
  • Modification to the Source selection via remote control. The SOURCE key now scrolls through a list of available sources, once the desired source name is found the source will be switched after a two second idle period.
  • Modification to default settings:
    -SpeakerLink is now 'On' by default.
    -SpeakerLink legends is now 'On' by default.
    -SpeakerLink EBA is now 'On' by default.
  • Modification to SpeakerLink/MComms precedence:
    -Balance and phase are not embedded in SpeakerLink data.
    -Bass and Treble sent on MComms only when SpeakerLink is off.
  • Added physical input field to stream information display.
  • Setting SLink to 'Off' reverts applicable SpeakerLink audio settings to their off state.
  • When transmitting MHR the Pro flag is set within the transmitter.
Software Fixes
  • Fix broken timing of SpeakerLink packets.
  • Ensure audio MComms messages are only sent when user adjusts associated audio item.

Last edited by VirusKiller; 2014-05-19 19:46. Reason: Added AC200
Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.