|
|
Joined: Feb 2011
Posts: 1,791
Knows where his towel is
|
|
Knows where his towel is
Joined: Feb 2011
Posts: 1,791 |
There's been a lot posted, I wouldn't say it was crystal clear! They change crossovers don't they...
Last edited by Tintin; 2014-05-19 18:58.
|
|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
We also have new firmware for all versions of DSP7200 and DSP7200HC. This includes refinements to the operation of EBA and other SpeakerLink-controlled features. We do, unfortunately get into the world of semantics here... Has EBA technology been developed or refined? An EBA v2? No. Has the EXACT implementation of 7200 EBA and/or the crossover been tweaked? Probably. It's possible that the overall delay has been modified to the new "standard" EBA delay.
|
|
|
|
|
Joined: Nov 2001
Posts: 2,161 Likes: 4
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: Nov 2001
Posts: 2,161 Likes: 4 |
I've been nothing but really impressed with M over the last year or two but I really miss not being able to download the new firmware for my 7200.2 L/C/R and 5200s and get started  I understand why they decided to change but on days like today it's a killer ! Looking forward to customised labels after all these years too lol ! M
Mostly harmless. Comfortably numb.
|
|
|
|
|
Joined: Feb 2011
Posts: 1,791
Knows where his towel is
|
|
Knows where his towel is
Joined: Feb 2011
Posts: 1,791 |
Curious now that the outstanding firmware updates are all non-display speakers? Is that right? EBA switching works on M6s so presumably current software will work the switches in 3200s, 3300s DSW (rather than needing new processor software). Excellent point! That's presumably why they have to wait until the processors/controllers are fully ready. Confused now as M6s are controllable by processors?
|
|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
DSP8000.2 Product Firmware Release 2.63 (2014-05-13) New Features - Added Enhanced Bass Alignment.
- Displays custom legends from SpeakerLink (with compatible controller).
- Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
- Boundary control renamed as Position. Must be configured per-speaker.
- Picks up Position control from SpeakerLink (with compatible controller).
- Setup changed so that all configuration is available by pressing zero on MSR at power-on.
- RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential - Comms. Fixes to timing and integration.
- Audio. Cleaner sample rate changes.
- RS232. Echoes all characters.
- RS232. Sends "Error" for unknown commands.
- RS232. Fixed automated reset with WinFup.
DSP7200 Product Firmware Release 2.63 (2014-05-13) New Features - Added Enhanced Bass Alignment.
- Displays custom legends from SpeakerLink (with compatible controller).
- Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
- Boundary control renamed as Position. Must be configured per-speaker.
- Picks up Position control from SpeakerLink (with compatible controller).
- Setup changed so that all configuration is available by pressing zero on MSR at power-on.
- RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential - Comms. Fixes to timing and integration.
- Audio. Cleaner sample rate changes.
- RS232. Echoes all characters.
- RS232. Sends "Error" for unknown commands.
- RS232. Fixed automated reset with WinFup.
DSP7200HC Product Firmware Release 2.63 (2014-05-13) New Features - Added Enhanced Bass Alignment.
- Added Centre Elevation.
- Displays custom legends from SpeakerLink (with compatible controller).
- Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
- Boundary control renamed as Position. Must be configured per-speaker.
- Picks up Position control from SpeakerLink (with compatible controller).
- Setup changed so that all configuration is available by pressing Zero on MSR at power-on.
- RS232. Added "EA", "CE", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential - Comms. Fixes to timing and integration.
- Audio. Cleaner sample rate changes.
- RS232. Echoes all characters.
- RS232. Sends "Error" for unknown commands.
- RS232. Fixed automated reset with WinFup.
DSP5200 RJ45 Product Firmware Release 2.63 (2014-05-13) New Features - Added Enhanced Bass Alignment.
- Displays custom legends from SpeakerLink (with compatible controller).
- Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
- Boundary control renamed as Position. Must be configured per-speaker.
- Picks up Position control from SpeakerLink (with compatible controller).
- Setup changed so that all configuration is available by pressing zero on MSR at power-on.
- RS232. Added "EA", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential - Comms. Fixes to timing and integration.
- Audio. Cleaner sample rate changes.
- RS232. Echoes all characters.
- RS232. Sends "Error" for unknown commands.
- RS232. Fixed automated reset with WinFup.
DSP5200HC RJ45 Product Firmware Release 2.63 (2014-05-13) New Features - Added Enhanced Bass Alignment.
- Added Centre Elevation.
- Displays custom legends from SpeakerLink (with compatible controller).
- Picks up Bass, Treble and Axis from SpeakerLink (with compatible controller).
- Boundary control renamed as Position. Must be configured per-speaker.
- Picks up Position control from SpeakerLink (with compatible controller).
- Setup changed so that all configuration is available by pressing Zero on MSR at power-on.
- RS232. Added "EA", "CE", "NV", "NVRS", new "BO" and "SW" as per M6 family.
Software Fixes - Useful - May be useful to upgrade but not essential - Comms. Fixes to timing and integration.
- Audio. Cleaner sample rate changes.
- RS232. Echoes all characters.
- RS232. Sends "Error" for unknown commands.
- RS232. Fixed automated reset with WinFup.
Meridian Audio Core 200 Firmware Release v1.10 (2013-12-24) New Features - Source legends may be edited.
- Source legends may be transmitted via SpeakerLink and displayed on attached speakers.
- Start volume.
- Reselecting active source doesn't interrupt audio stream.
- Dynamically show or hide the Movie/Music mode audio control depending if SpeakerLink is On or Off.
- Modification to the Source selection via remote control. The SOURCE key now scrolls through a list of available sources, once the desired source name is found the source will be switched after a two second idle period.
- Modification to default settings:
-SpeakerLink is now 'On' by default.
-SpeakerLink legends is now 'On' by default.
-SpeakerLink EBA is now 'On' by default. - Modification to SpeakerLink/MComms precedence:
-Balance and phase are not embedded in SpeakerLink data.
-Bass and Treble sent on MComms only when SpeakerLink is off. - Added physical input field to stream information display.
- Setting SLink to 'Off' reverts applicable SpeakerLink audio settings to their off state.
- When transmitting MHR the Pro flag is set within the transmitter.
Software Fixes - Fix broken timing of SpeakerLink packets.
- Ensure audio MComms messages are only sent when user adjusts associated audio item.
Last edited by VirusKiller; 2014-05-19 19:46. Reason: Added AC200
|
|
|
|
|
Joined: May 2008
Posts: 8,505 Likes: 78
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2008
Posts: 8,505 Likes: 78 |
Hi all, Meridian have updated their Firmware Release Notes, see link at the bottom of the forum page for details. Note for DSP's that already supported EBA this is just a cut/paste typo. New Features
�Added Enhanced Bass Alignment. I'm looking forward to listening at home once the firmware is installed. Regards, Carl
861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)
|
|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
see link at the bottom of the forum page for details. Or maybe the post above yours
|
|
|
|
|
Joined: May 2008
Posts: 8,505 Likes: 78
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2008
Posts: 8,505 Likes: 78 |
Yes, our posted crossed (my long start to end edit whilst getting distracted by day job). I chose not to duplicate all the details
861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)
|
|
|
|
|
Joined: Sep 2009
Posts: 5,358 Likes: 2
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Sep 2009
Posts: 5,358 Likes: 2 |
Curious now that the outstanding firmware updates are all non-display speakers? Is that right? EBA switching works on M6s so presumably current software will work the switches in 3200s, 3300s DSW (rather than needing new processor software). Excellent point! That's presumably why they have to wait until the processors/controllers are fully ready. Confused now as M6s are controllable by processors? Right. So that's not the reason then. I've double checked and 3200/3300/DSW definitely aren't yet ready for release. But I'm sure they'll be along before too long.
Ex-moderator
Sitting room: dCS Network Bridge, 818v3, HD621, 8kSE
Library: dCS Rossini Apex DAC/Clock, Clearaudio Performance Wood, Audio Research PH2, Mjölnir KGST, Mjölnir PureBipolar
SWMBO Room: 210, D33
Kitchen: RPi/RoonBridge, Genelec 6010 actives
Desk: Merging Anubis
Server: Roon/ROCK/NUC
Headphones: Stax SR-X9000, Stax SR-007, Stax SR-404LE, Audeze LCD-X...
Oldest audio file: 1889 Edison cylinder
|
|
|
|
|
Joined: Nov 2001
Posts: 2,161 Likes: 4
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: Nov 2001
Posts: 2,161 Likes: 4 |
Yes but where can we get the actual firmware? No dealer available today and off work so ready to go :O)
~M~
Mostly harmless. Comfortably numb.
|
|
|
|
|
Joined: Sep 2009
Posts: 5,358 Likes: 2
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Sep 2009
Posts: 5,358 Likes: 2 |
I'm sure you'll get a PM from a friendly PP shortly.
Ex-moderator
Sitting room: dCS Network Bridge, 818v3, HD621, 8kSE
Library: dCS Rossini Apex DAC/Clock, Clearaudio Performance Wood, Audio Research PH2, Mjölnir KGST, Mjölnir PureBipolar
SWMBO Room: 210, D33
Kitchen: RPi/RoonBridge, Genelec 6010 actives
Desk: Merging Anubis
Server: Roon/ROCK/NUC
Headphones: Stax SR-X9000, Stax SR-007, Stax SR-404LE, Audeze LCD-X...
Oldest audio file: 1889 Edison cylinder
|
|
|
|
|
Joined: Aug 2010
Posts: 275
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2010
Posts: 275 |
Does the DSP8000.2 Product Firmware Release 2.63 (2014-05-13)�work as such for the Anniversary System 8k also or is that a separate FW version? Note that the existing FW is different for the anniversary.
Regards
Oppo UDP-203, Sonos, Nvidia Streamer, Fire TV 4K, Trinnov Altitude32 into Dan D'Agostino Momentum into Wilson Alexx, Paradigm Sub 1, Monitor Audio In Wall surrounds, JVC NX9
|
|
|
|
0 members (),
277
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,204
Posts297,198
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
