Hi,

Try putting the system in standby, pointing the MSR+ at the DSP520 and then pressing the clear button.

This should (might?) setup the DSP as controller and the processor as not-controller.

Regards,
Carl

PS I assume that this DSP520 is setup as the MASTER and is connected into the MASTER bank on the G61RSL via SpeakerLink.

861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)