Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems 861v4 Config identifying product but no communication!

Hi

You should be able to change the COM port.

This is done in Windows Control Panel > System Settings > Device Manager > Click on the Comm Port > you should be then able to modify the port number within one of the tabs.

(Some adapters come with an application to change the port number.)

Once you get the port number changed to either 1, 2, 3 or 4 then make sure you configure the legacy configuration program to use that.

Hopefully that will then resolve the ability to talk to the products.

Regards
Edd