Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems Adding DSP3200 surrounds with G61RSL

If I replace the front 5200 speakers with the two 3200s they work fine, but the centre / sub are not controlled.

I tried a new config with the right 5200 speaker setup as the master with the matching swap of its cable to its master SL socket, plus a changing the designated master in the Meridian config to front right. The end result is the same as my test yesterday - connecting either 3200 into the rear master SL socket causes the comms to only control the master speaker, but wiring the 3200s daisy chained via the rear slave SL socket works fine.

I tried one other test config with the 5200HC set to master, but neither 5200 would come out of standby, that's with the 3200s disconnected.

Andy