|
|
Joined: Jun 2012
Posts: 25
Harmless
|
|
Harmless
Joined: Jun 2012
Posts: 25 |
Hi All,
Without getting into the long story as to why, the ribbon cable which connect my DSP8000 to it's back panel ripped.
Fortunately, this doesn't effect audio. However, I would obviously like to fix it.
In order to do so, all I thought I had to do was replace the IDC 2x5 pin connector.
I tried that and can't get it to work.
Basically, the IDC has 10 pins, and the ribbon cable has 9 wires. I lined it up with the ground on the connector and cable, and I have the empty pin adjacent to the ground, but it doesn't work.
Is this right? Should the empty pin be adjacent to the non ground end wire? Does Meridian have a non-standard 2x5 connector?
While I fortunately don't have to interrupt the use of my system, this prevents me from retyping the speaker, or troubleshooting if something occurs. Also it looks nicer.
Any suggestions?
Speaker Systems:
1. 2xDSP 8000s, DSP 5500C, 861v4, HD621
2. 2xDSP 6000s, HDMI Switch > Atlona HDMI De-embedder
Headphone Systems:
1. Audeze LCD 3, Stax 009, Chord 2Qute > Violectric 281 > Stax 717
2. Audeze LCD XC, Fostex TH900, Bel Canto Reflink > Chord Hugo > CI Audio Passive Pre, Auralic Taurus
Sources:
Oppo BDP 93 and 83, Project Carbon TT, J River
|
|
|
|
|
Joined: Feb 2012
Posts: 715 Likes: 16
Paranoid android
|
|
Paranoid android
Joined: Feb 2012
Posts: 715 Likes: 16 |
Hi
Couldn't you just look at the other speaker?
Neil
1) MS200, G65, Revivers, DSP5000.2, DSP5000C.2, DSP3100, D1500, SME10/IV.
2) Mac Mini (Roon), Explorer 2, Sennheiser HD6XX.
|
|
|
|
0 members (),
1,685
guests, and
0
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,236
Posts297,349
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
