Hi PerS,

For TYPE 5 this behaviour is what I would expect.
CD Source
MASTER DSP input = RJ45
SLAVE DSP input = RJ45

All other Sources
MASTER DSP input = Coax
SLAVE DSP input = RJ45

So when you selected AUX [SLS] the master speaker switched to Coax and was silent, but the Slave Speaker was still on RJ45 and receiving input directly from your 808.4.

I think this is a hang up from when using daisy-chained DSP pairs (where the Slave would always use D1 input) and not �home run� with each DSP connecting back to the processor/controller with SpeakerLink.

Unless you want to connect an addition source to the DSP�s Coax inputs then TYPE 1 (configured for RJ45) is what you need.

Regards,
Carl

861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)