Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems 568.2 and 562v2 setup question

Hi,

Comms 1 is Meridian CD.
Comms 2 is Meridian Radio.
Comms 3 is Meridian DVD.
Comms 4 is Meridian Sooloos.

Non Meridian equipment is NC.

You would want the 568 to do main volume and no volume on the 562.
Set the physical inputs on 562 to the source label you require.

On the 568, those sources must be D1 in your set up, then label as required in the 568.
The same for other inputs in 568, source D2 o1 ( or what ever you use)

Don't mess with system address, leave as default.
Make sure you only have one controller, the 568. Re read the manual to check this.

It should be logical when you get your head around it.

Off the cuff thoughts, but do re read the manuals, Chris