I am having some issues with Control:PC and Configure:PC. I will be greatful if anyone can give me some pointers.

First my set-up. PC:W7/64-bit; Router:D-Link DIR-655; C15 hardwired to the router about 2 meters from the PC and the router. DHCP IP addresses are hard coded on the router for both the PC and C15 MAC's. Everything is up to date and operational. There are no filters / multicast blocks or anything within that network.

1. Configure:PC does not see the C15 at all. All I see is the PC. I've uninstalled/reinstalled multiple times.

2. If C15 is powered down and powered up, Control:PC just spins its wheels - never connecting to C15. The IP address is correct on the C15, it is pingable from both router and the PC. I can connect via browser without any problems. When I go to the debug page from PC, the C15 is shown as connected as well as the PC as a zone. It is just that Control:PC app does not connect. The only way I can get it re-connect is re-boot the router. Rebooting C15 does not solve the problem.

Related to #2, when Control:PC works, upon launch, I see the IP of C15 on the status line (bottom of the app). When it just spins, there is no IP shown.

It is not a vital problem, but pretty irritating as rebooting router disturbs other -unrelated- operations (NAS copy etc).

Any suggestions will be greatly appreciated.

(I love my C15!)

Al.

Main : C15, MD600, Aurender N10, EMM DAC2X, Boulder 865, Oppo BDP-95, JM Labs Maestro Utopia
Office : PC, Resonessence Invicta, HD800