Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Streaming C15 comms to non SL G68

Hi Dolf.

I'm assuming you have the G68 set as the 'Controller'
(So it is the device that receives the IR command from the MSR)

As Slartibartfast suggests, you need to set the Comms type to 4C for the Control 15 source (AUX) in the Meridian Configuration Program for the G68.
This will then allow the MSR transport buttons to control the Play Queue on the Control 15 as if it were a CD.

However if one of your DSP speakers is the 'Controller' then you need to set 4C Comms type for the Aux source in that speaker
This is by default if you have latest firmware and SLS showing on the DSP speaker.

Doesn't do much if you only have one track in the play queue though!

Cheers,

Rick