Hello Bernie,
I would recommend the Sim2 top of the line DLP projectors for their outstanding picture, unbeaten connectivity, remote input box that can be ANY distance from the PJ with no signal degradation (optical fibre technology). Also Sim2 have endorsed the HDMI standard which is simply the best hi resolution connection you can have for the G68!

I would recommend the Sim2 projectors in the following order:

1. Sim2 HT500 LINK - 3 chip DLP2 projector, if you are sensitive to rainbows and dithering of any DLP projector and simply want the best picture there is in a compact case, this is the one to get! The LINK models have a separate input source slimline box that can be rackmounted if needed. Connected via optical fibre cable and has outstanding flora of inputs. Scaler and all processing takes place in this box, thus makes it possible to upgrade connectivity or processing like scaling and deinterlacing just by upgrading this box. HDMI connection makes it a perfect mate for the G68.

2. Sim2 HT300 LINK is top of the line single chip DLP2+ projector. Outstanding picture quality. Also features the excellent LINK processing and source input box. HDMI.

3. Sim2 HT300 XTRA has the same excellent optics and HD2+ display technology as the HT300 LINK but with the scaler and inputs on the PJ instead. It has a remote source input station as well as an option but not as good as the LINK. The HT300 Xtra will be upgraded to HDMI input on the main chassis during 2004.

[This message has been edited by crion (edited 01-17-2004).]

DSP8000SE, DSP7200SEHC, DSP5200SE sides, DSP7200SE rears, 861v8, 210, Sim2 Ultranero 4, Stewart Cinecurve 2.35:1, XEIT CM-5E Anamorphic lens, Dune HD Duo Cinema 8K and Wireworld Platinum 48G HDMI -> UHD722 -> Shunyata Omega Ethernet. Shunyata/Furutech power-cables/filters. SR Master Fuse@861v8. Uptone Etherregen with 10MHz OCXO clock.