Hi guys,

I've just tried everything that Peter suggested and found the info very useful. (Thanks Peter!) Although I managed to get into that program & change the ports etc. & changed the COM port on the Legacy program, still nothing worked. I'm now 90% sure its down to one of the cables NOT being a NULL cable. So I've ordered that Keyspan adaptor and I'm awaiting for it to be delivered then I'll try that port process again & hopefully everything should work fine.

I've looked at the Legacy program and found a lot of interesting stuff you can do with the 568. One of the main reasons I'm now playing about with this progam is I've recently got a seperate Arcam power amp to drive my rear speakers. Although when it's all connected up I get sound out of the rear speakers, it's like it's at FULL volume when it comes out even when the 568 is on volume 1.

I was hoping that using this Legacy program I would be able to change the volume output on the 568 to the Arcam power amp. So far for the rears I've changed them to SMALL ANALOGUE REARS & I'm hoping when I get this all connected up & working this should solve this rear volume issue & make them at equal volume to the other 3 speakers.

Thanks guys,
Marc

Current System # 568.2, DSP5500 (24/96), DSP5500C (24/96), DSP33 rears, M1500 subwoofer


Previoursly Owned # DSP5000(MK1 24/96), DSP5000C(MK1 24/96), Denon Amp, ProAc 1SC speakers, ProAc Hexa & Studio Centre, B&W DM603s3 & 601s2 & LCR 60 speakers, Sonus Faber Minuetto speakers.