Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems PLIIx is now there download

Oz,

Since 568 is based on the 861 software, I would say probably in the very near future.

Cheers,

568.2 is based on 861V3 software. 861V4 and G68 are probably running the same software. (well, close anyway.)

I have upgraded my 861. It seems all went well.
First i installed the software, that went without problems. Than i installed new GUI and pulled the current setup from the 861. I removed my old EZ user presets and stored it again. Was that perhaps not the way to do it ?

I had to do RC again, but perhaps due to my own mistake? When i went into the RC part,the software told me to re-run the procedure. Perhaps i should have loaded the current measurements from the Harddisk?

Jaco


I can always start from scratch if that is a better plan.

I asked Meridian about the upgrade for 568.2 and was told that it has to be tested and approved by Dolby before it can be released. They would not give a date but it's next in line after G series and 861 V3/V4. Point is, it's coming and I fervently hope that it does for 568 what the V4 folk are reporting by way of improvement...

Steve

I second that, Steve. Whatever DSP code-tweak the guys have come up with, I hope it finds it's way into the 568.2.

It's going to be a quite some time before I can do G68 or 861.

Rgds

Nick