I am feeling very frustrated having gone from a single sub that worked fine to two, neither of which work. My original plan was to site a sub under each of the front R & L DSP33s. This has proved logistically impossible and they are now sited in corners, one pretty much behind the centre with the other to the left (approx 10'). I was curious to see what they sounded like as a stereo pair......hence the start of this whole fiasco.

In my attempt to change I have forgotten how I had the single set up - presumably if I return to this setup I can then daisy chain the second off the first and get a more even result. I would be very grateful if a kind h'hiker could explain to me how to get them working. As things stand I have a working front three speakers & rears (although when I went through the calibration test the centre seemed much louder than the front R & L) what I think would help is a step by step series of instructions how to add the subs, both in Mconfig, lead routing & what to do with the channel switches at the rear. Any assistance would be most gratefully received.

568.2mm, DSP6000, DSP5200HC, DSP33 rears, HD621, LG G3, Sony UBPX800-M2, F80.