Originally Posted by Evdberg
Originally Posted by Ken
[quote=Evdberg][quote=Ken]I do not run it full range. The ADA is crossed over at 80hz.
You stated that all 8 channels of the SSP where connected to the QSC, so which device (SSP or QSC) does output above 80Hz to your speakers?

As stated, the SSP is set at 80 hz.[/quote]
Let's summaries what you have said so far:
- The SSP is doing crossover at 80Hz.
- The QSC is doing crossover at 80Hz.
- All 8 channels of the SSP are connected to the QSC.

Questions remaining to get the full picture:
- From what device are you speakers connected?
- What speakers are defined large or small in the SSP.
- What speakers are defined large or small in the QSC. [/quote]

Here ya go:
1. SSP set to 80 hz. IT is performing bass management.
2. All channels go from SSP to QSC. Output of QSC go to the amps.
3. Speakers are set to small all around in the SSP.

This whole thing is ridiculous. I prefer the ADA over the 861 and you guys need me to justify why I like it better because you cannot believe somebody would like another unit over your holy grail. It's like you have to find out how it could be possible. It's like we go out to dinner and you like your fillet and I like my porterhouse and I need to explain how my meal could possiblly taste better than yours TO ME. Actually, bad example, if you weren't drinking the koolaid, you would prefer the ADA too.
Ken



Meridian 861v6, HD621, G98, Pioneer BD-09, Mark Levinson 436 monoblocks, Aerial Acoustics 20T, CC5, SR3, SW12, Mark Seaton Submersives, QSC 322, Runco Vx22D, Lumagen Radiance XE