I had similar problems years ago and it was solved by retyping. I forget the exact process but it is in the instructions. If memory serves, the instructions call for pressing and holding an up button and I took it to mean the up button of the 4 arrow buttons, it was really the volume up button. These types are factory setups stored in the unit so you will wipe out all your settings. IMHO, though painful, I would write down all your settings, even the RC ones if you are happy with them. Then make sure your 861 has the latest FW and then go and upload your new M config and try the RC. One other thing is to try setting the analog input sensitivity to more sensitive.

Last edited by JerryL; 2010-02-09 11:50.
Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.