Hi Andy,
The G9 connector has up to 8 channels of SPDIF output up to 192KHz. Using a suitable custom cable it can connect directly into the MMHR connector on the 568.2mm (max 96KHz).
Whatever output mode you select on the X-Meridian (2 channel, 6 channel, 8 channel, 44KHz, 96KHz, 192KHz) just appears on the G9 connector.
Using Foobar2000 and ASIO mode output you can verify the output is bit perfect (at least in 2 channel mode) by playing a WAV file with DTS encoded content. The 568.2 identifies the DTS stream and decodes it (even if it's coming into the MMHR connector).
Note, that if you use TMT3 it will limit the output sample rate to 48KHz and the bit depth to 16 bit.
You can google "bluraystats" to find a web site which will tell you what the format on the disk is. Quite often 48KHz / 16 bit is all there is.
-Ronnie
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
