|
|
Joined: Mar 2009
Posts: 343
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2009
Posts: 343 |
Do you have the equipment to measure the jitter improvement with your mod? If so, what are the before and after rates? Is the reduction significant? no, I currently don't have any way of measuring jitter, my claims are based purely on customer feedback and my own usage with other mods(like SDI, which jitter effects greatly) and listening myself I am 100% positive that J and Joe will see(or should I say hear) what the digital transport ed is all about thanks
|
|
|
|
|
Joined: Mar 2009
Posts: 343
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2009
Posts: 343 |
I notice there's a sticker next to the IEC connector that says "no balanced". does it not accept balanced power ? (I use a ps audio power plant.) exactly, you can't connect the unit with upgraded power supply into 60/60 balanced power sources, this is because of how the transformer is setup, thankfully with the mods you don't need to plug this into a balanced power rig the power plant is not balanced power as far as I know, balanced power uses a transformer and the output is labeled as balanced 60v/60v the unit can be connected to any power setup from Panamax, Monster, PS Audio as long as it delivers straight normal 0/120v some balanced power setups do have non-balanced outlets on them as well, so you can connect the Oppo there as well thanks
|
|
|
|
|
Joined: Mar 2009
Posts: 343
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2009
Posts: 343 |
region free and HD-SDI options:
-Region free mod will apply to both DVD and Blu-Ray and is a manual switch that uses the remote while the player is powered down -HD-SDI is the highest end video signal output possible today, direct digital decoder output with no HDCP, HD-SDI supports 480i, 720p, 1080i and 1080p/24, the Oppo 83 HD-SDI will also have support for 720p/50, 1080i/50 and 576i modes as well, which covers all Blu-Ray and DVD media from anywhere in the world
thanks Hi Gary Could you please confirm the following: 1. I seem to remember reading somewhere that the region free would be automatic for DVD and manual for Blu-ray. Is that incorrect? 2. I assume that all the output formats mentioned above as available from HD-SDI are also available on HDMI. Is that correct? 3. Any confirmed date for availability of region free? Thanks Colin, the region free mod will be manual, not automatic, the unit is powered down and the region changed on the remote, then powered back up, takes about 10 seconds 480i, 576i, 720p/50, 720p/60, 1080i/50, 1080i/60 and 1080p/24 are available via the HD-SDI output region free and HD-SDI will be available soon, still being worked out, won't be much longer now and may coincide perfectly with the release of stock to dealers in a few weeks thanks
|
|
|
|
|
Joined: Oct 2006
Posts: 141
Hitchhiker
|
|
Hitchhiker
Joined: Oct 2006
Posts: 141 |
Turns out that coachjay lives about 3 minutes from where I work... we are going to get together for a couple of listening sessions (my place, then his) where we can do an A/B comparison of my partially modded Oppo and his fully modded version (he's one of the guys getting one of the early units from Gary). Once he receives his unit, the fun will start... we will of course post our results. If you're interested in having an extra set of ears during these tests, let me know and I may be able to join you. Stuart
861v6, HD621, DSP5200, DSP5500HC, DSP33, ROKU3, Transporter, VP50Pro, Pioneer 6010, Pronto TSU/RFX9600.
|
|
|
|
|
Joined: Mar 2005
Posts: 1,053 Likes: 1
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053 Likes: 1 |
the power plant is not balanced power as far as I know, balanced power uses a transformer and the output is labeled as balanced 60v/60v
the unit can be connected to any power setup from Panamax, Monster, PS Audio as long as it delivers straight normal 0/120v That means it's no transformer upgrade for Europeans, we need 120/240 50/60 like the original. But I think the Meridian SPDIF mod is enough for me anyway. BTW, have we seen any Powerbuy prices? What retail price for the player have you used when calculating your prices at http://www.custom-ht.com/oppo.html?
HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
|
|
|
|
|
Joined: Apr 2009
Posts: 17
Harmless
|
|
Harmless
Joined: Apr 2009
Posts: 17 |
Turns out that coachjay lives about 3 minutes from where I work... we are going to get together for a couple of listening sessions (my place, then his) where we can do an A/B comparison of my partially modded Oppo and his fully modded version (he's one of the guys getting one of the early units from Gary). Once he receives his unit, the fun will start... we will of course post our results. If you're interested in having an extra set of ears during these tests, let me know and I may be able to join you. Stuart I don't have a problem with that at my place... coachjay will have to answer for himself concerning any listening session at his home. Send me a PM/email so I don't lose track... I'll let you know when we have the play date nailed down for my listening session.
|
|
|
|
|
Joined: Aug 2003
Posts: 9
Harmless
|
|
Harmless
Joined: Aug 2003
Posts: 9 |
Put me down as interested in the powerbuy as well. Can you confirm if the transformer upgrade is suitable for the UK/Europe?
861v6, HD621
|
|
|
|
|
Joined: Sep 2003
Posts: 131
Hitchhiker
|
|
Hitchhiker
Joined: Sep 2003
Posts: 131 |
the power plant is not balanced power as far as I know, balanced power uses a transformer and the output is labeled as balanced 60v/60v iirc the older power plants did have balanced out. however it looks like the current premier does not (as verified by ps audio) hence the confusion.
|
|
|
|
|
Joined: Feb 2002
Posts: 37
Harmless
|
|
Harmless
Joined: Feb 2002
Posts: 37 |
I'm interested as well in the Meridian edition inkluding region free.
Viele Gruesse Proton 861, 800, HD621, 3xDSP5500, 4xGenelec actives
|
|
|
|
|
Joined: Mar 2005
Posts: 1,053 Likes: 1
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053 Likes: 1 |
I wonder if I would soon get an email from Oppo that I can order a unit, if they would let me have it shipped to CHT (for modding) instead of to my registered address...? I'm sure they would, I am having a few guys look into doing this right now, as long as they have your billing address I don't think they would mind, plus the people at Oppo know me pretty well I would think  let me know if you need any help at all Well, I could be a mentioned "Early Mod Adopter" supplying my own Oppo, got my Priority Order email after I told them the player shouldn't be shipped to Sweden but to you. What are the mod prices (PM if you want) when sending an Oppo to you? Mainly the plain Meridian mod (can't have a 120V-only transformer) and possibly region-free (might be ready when you get my player from Oppo)?
HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
|
|
|
|
|
Joined: Mar 2009
Posts: 343
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2009
Posts: 343 |
the power plant is not balanced power as far as I know, balanced power uses a transformer and the output is labeled as balanced 60v/60v
the unit can be connected to any power setup from Panamax, Monster, PS Audio as long as it delivers straight normal 0/120v That means it's no transformer upgrade for Europeans, we need 120/240 50/60 like the original. But I think the Meridian SPDIF mod is enough for me anyway. BTW, have we seen any Powerbuy prices? What retail price for the player have you used when calculating your prices at http://www.custom-ht.com/oppo.html? no that does not mean no transformer mod for 220v, the units can be wired for 220v just the same as 120v input, the power supply mods I do are 100% capable of both, just when set for the given power sources like say 120v you can't connect 220v or vice versa, unlike the stock Oppo which takes all in at once powerbuy pricing will be around 8 to 10% off the website prices as it stands now, there is talk about the Oppo being 599$ instead of 499$ which would effect these prices thanks
|
|
|
|
|
Joined: Mar 2009
Posts: 343
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2009
Posts: 343 |
Put me down as interested in the powerbuy as well. Can you confirm if the transformer upgrade is suitable for the UK/Europe? my power supply mod is 100% capable with 220v or 120v, the buyer just needs to tell me which he needs and I set it up for that spec thanks
|
|
|
|
1 members (dpstjp),
347
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,152
Posts296,952
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|