Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems Triggers

I'd be interested to know how to turn triggers to low(off 0v) when you turn the G68 off. Is it able to go low even when the last source was high?

You do it in mconfig. Right click on g68, properties then click sources tab.

Yeah I see what you mean. But that part I'm familiar with. It's when i turn the g68 off into standby I want the triggers to go low so my PPP turns off.

I cant find that option. Now it remain high when in standby.

I'm a bit confused by your request if it's set high for a source it should be low when you select another source (as long as it's set low) or standby. Otherwise it makes no sense as a trigger. My guess is what ever you plugging in is not compatible.

Set every trigger on ever source low and set one high on one source and see if that works.

It sure works as it should exept when it goes to standby as the last choise stays enabled.

So if my source is set to High, it will remain at High when it goes to standby.
If my source is set to Low it will ofcourse stay at Low on standby.

This is for my trigger3, I will try if trigger1 has the same characteristics.

Okay let me summarize.

Trigger1 work exactly as I want it to work. When I set High to a source the trigger activates +12v, in standby it switch to Low +-0v.

Trigger3 doesn't work like this. It does activate +12v when source is set to High. But does not go to Low in standby.

Am I the only one who experienced this behavior?

I've never checked them each out like that. But it's possible you have a defect or perhaps there is slightly difference in behavoir. Be sure to go through ALL the sources and see how all 3 are setup for each source. I always thought they all could be setup to behave the same.

I will check all the trigger. Check if they behave in the same way.

Unfortunately my Swedish distributor refuses to take on warranty issues. I bought my g68 in Denmark and is therefore referred there for warranty issues. Is it really so? Should it not apply internationally?

As it is now, I get punished by the Swedish agency for goods purchased in my old residence.

I also have problems with volume slider that gap and do not react as it should.

I've had 1 of the triggers "stick" in the on(high) position, and was able to get it to work correctly by reloading the software in the g68. I have since bought digital speakers so the triggers aren't of much use to me, so I don't know if they are still working?

Thank's for the information Keyboard.

I will try this one out later on. I have no use for the trigger3 right now actually. The reason I discover this, was that I just thought the location of the trigger3 was better.