logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rate Thread
Anonymous
Unregistered
Anonymous
Unregistered
Want to know if anybody makes ceiling mounts for DSP 33's. I know omni mount makes a wall mount but I don't know if it can be used as a ceiling mount as well.

Also, how good is the bass in the DSP 33's? Would they be a good choice for a surround speaker for those who don't have enough floor space for any of Meridian's floor standing models?

Joined: Feb 2002
Posts: 1,210
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Feb 2002
Posts: 1,210
Likes: 1
very creative name, unregistered ;-)

the bass in the 33 is surprisingly non-crappy. it's no 5500 or anything, but it's far better than i know i expected.

i use 5000s as my rears, and i use 33s in my bedroom as the only speakers. i listen to the jazz stations off the satellite all the time and i think they sound quite nice.

i originally bought them to use as my rears in the den, but was concerned that they'd lack enough bass. after using them now for a few months in the bedroom i'm reconsidering installing them in the den (much better WAF) and moving the 5000s to the bedroom.

i have the omnimount wall mounts. i don't think the arm has enough clearance to be used as a ceiling mount (the speakers wouldn't be able to get vertical). i'd be stunned though if omnimount didn't have a similar ceiling-mountable version.

good luck.

doody.



The universally-derided DSP6000 Standing Desk, R.I.P.

Gathering dust: 598 w/SDI & 562V

Current system: Roon feeding a Chord Hugo2go driving Omega Compact Alnico Monitors
Joined: May 2000
Posts: 49
Mostly harmless
Mostly harmless
Offline
Joined: May 2000
Posts: 49
I have mounted the 33's in my theater ceiling with Omnimounts, without any difficulty. These are only my side speakers. For the rears I wanted more bass response, so I used 5000C's. I have run frequency response tests on both pairs, and the 5000C's reach much deeper.


Chris Cooper
Anonymous
Unregistered
Anonymous
Unregistered
Let me be more specific. Would DSP 33's as side and rear surrounds produce enough bass to satisfy if I had 5500's upfront, 5500C, and 2 M&K THX5000 subs?

I would love to put 5000's or 5500's for the sides and rears but I fear there just isn't enough floor space. People sitting at the edges of the room would be too close to a floor standing speaker.

Joined: Feb 2002
Posts: 1,210
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Feb 2002
Posts: 1,210
Likes: 1
unregistered - i have 6Ks front and a 5500HC. the 33s and 5000s are woefully bass-shy in comparison. so if that's your point of comparison, it's a BIG difference between them.

BUT if you have two subs and can put one on the rear channel, i don't see how you'd have a problem.

my two pennies.

doody.



The universally-derided DSP6000 Standing Desk, R.I.P.

Gathering dust: 598 w/SDI & 562V

Current system: Roon feeding a Chord Hugo2go driving Omega Compact Alnico Monitors
Joined: May 2000
Posts: 49
Mostly harmless
Mostly harmless
Offline
Joined: May 2000
Posts: 49
I also have 6K's in the front, and my bass response is just fine, even without subwoofers. I would say that your plan will also work well.

It takes a very big room to be able to use floor-mounted sides and rears without blasting some of your guests in the ear. Ceiling mounts seem to be the best alternative.


Chris Cooper
Anonymous
Unregistered
Anonymous
Unregistered
thanks for your help. a couple more quick questions.

What do the DSP 33's retail for per pair?

ccooper: What specific Omnimount 75 series model do I need to ceiling mount DSP 33's?

Joined: Feb 2002
Posts: 1,210
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Feb 2002
Posts: 1,210
Likes: 1
no clue on retail, but you can get 'em used 2000 a pair to 2500 a pair.

check the PDF manual on the Meridian site for the specific omnimount data - that's where i got it from.

doody.



The universally-derided DSP6000 Standing Desk, R.I.P.

Gathering dust: 598 w/SDI & 562V

Current system: Roon feeding a Chord Hugo2go driving Omega Compact Alnico Monitors
Joined: May 2000
Posts: 49
Mostly harmless
Mostly harmless
Offline
Joined: May 2000
Posts: 49
unregistered,

Now that they are mounted, there are no model markings on them, so I can't tell which one it is. The mount attaches to the ceiling, goes straight down about 6 inches, then bends at a 45 degree angle to another segment of several inches. Then there is the adjustable omnimount ball joint on the end.


Chris Cooper

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
2 members (Colin Triggs, Mr Meridian), 685 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,225
Posts297,300
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.086s Queries: 32 (0.051s) Memory: 0.8586 MB (Peak: 2.2177 MB) Data Comp: Off Server Time: 2026-10-24 02:34:35 UTC
Valid HTML 5 and Valid CSS