|
|
Joined: Aug 2006
Posts: 757 Likes: 20
Paranoid android
|
|
Paranoid android
Joined: Aug 2006
Posts: 757 Likes: 20 |
“3M Bumpon” is what you’re looking for. I think they’re a bit bigger, approx 19mm diameter 9-10mm depth. Note they are not all made of the same material but the correct ones have excellent vibration isolation. I think the ones you’re looking for might be SJ5017?
There used to be a guy sold them on eBay, he had beautiful handwriting! I still have the envelope that arrived with my spares inside. But that was years ago. As said they sometimes just go soft and gooey and need replacement, lighter-fluid was a good cleaning agent to left the old adhesive and sticky block off the piece of kit, and then easily replaced. Meridian used these for years, the old 200 series kit certainly had them.
Best wishes
Richard
Last edited by Richard W; 2026-06-16 12:54. Reason: Clarify not all Bumpon are vibration isolating
Main system; 861v8 ID41, DSP8000SEU fronts with DSP5500 centre and DSP7000 rears (all in lovely silver) 504, HD621
Second system 861v4 ID40 LPS, G98DH, 504, HD621, 2x DSP5200 with DSP5200 centre
MD600 tucked away in study. Lots of other Meridian!
|
|
1 member likes this:
Syles |
|
|
|
|
Joined: Mar 2023
Posts: 113 Likes: 1
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2023
Posts: 113 Likes: 1 |
3M still has the 5017s at specialty stores.
And they come as minimum 40 pieces. Nice.
Last edited by Bormester; 2026-06-16 14:00.
G61RSL, DSP7200, DSP5200HC
Lumin D2
Akai GX-620, Teac A-3300SX, Nakamichi CR-4A, CR-2A
Oppo BDP-103
Sony PS-X600, Nagaoka MP-110, Denon DL-103R
NuPrime STA-9, Elac BS 63
PS Audio PP10
|
|
|
|
|
Joined: Jul 2004
Posts: 1,868 Likes: 13
Knows where his towel is
|
|
Knows where his towel is
Joined: Jul 2004
Posts: 1,868 Likes: 13 |
16mm 3M bumpons are available from Amazon (UK)
Under review
|
|
|
|
|
Joined: Mar 2023
Posts: 113 Likes: 1
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2023
Posts: 113 Likes: 1 |
This is what I can find here.
G61RSL, DSP7200, DSP5200HC
Lumin D2
Akai GX-620, Teac A-3300SX, Nakamichi CR-4A, CR-2A
Oppo BDP-103
Sony PS-X600, Nagaoka MP-110, Denon DL-103R
NuPrime STA-9, Elac BS 63
PS Audio PP10
|
|
|
|
|
Joined: Aug 2006
Posts: 757 Likes: 20
Paranoid android
|
|
Paranoid android
Joined: Aug 2006
Posts: 757 Likes: 20 |
Great, in the UK some joker on eBay wants over £5 each and Amazon will sell you 1000 but for £250! Grab those 👍
Main system; 861v8 ID41, DSP8000SEU fronts with DSP5500 centre and DSP7000 rears (all in lovely silver) 504, HD621
Second system 861v4 ID40 LPS, G98DH, 504, HD621, 2x DSP5200 with DSP5200 centre
MD600 tucked away in study. Lots of other Meridian!
|
|
|
|
|
Joined: Mar 2023
Posts: 113 Likes: 1
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2023
Posts: 113 Likes: 1 |
Although even in this case shipping costs almost as much as the merchandise, it’s not too bad, compared to what is out there.
I’m wondering if the latest Mconfig would work with the 561?
G61RSL, DSP7200, DSP5200HC
Lumin D2
Akai GX-620, Teac A-3300SX, Nakamichi CR-4A, CR-2A
Oppo BDP-103
Sony PS-X600, Nagaoka MP-110, Denon DL-103R
NuPrime STA-9, Elac BS 63
PS Audio PP10
|
|
|
|
|
Joined: May 2005
Posts: 824 Likes: 161
Paranoid android
|
|
Paranoid android
Joined: May 2005
Posts: 824 Likes: 161 |
Nope - you need the legacy configuration program to configure the 561
Cheers,
Steve
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5k.2C, DSP33, F80
Spare: MCD, 100 Series, 200 Series, 500 Series, C15s.
|
|
|
|
|
Joined: Mar 2023
Posts: 113 Likes: 1
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2023
Posts: 113 Likes: 1 |
Then another thing to chase, is the legacy MConfig working under Windows 10 or 11?
**********
Somewhat off topic, but not completely.
3 years ago I connected my laptop with the G61RSL I have, purchased cables for the purpose. It worked (the connection) but didn't do changes in the system through the software. I didn't have the time to get into MConfig details.
I then put away the cables, 3 cables.
1. Tripplite - Keyspan, USB ending, goes into laptop
2. StarTech null cable RS232 female ending, goes into G61RSL male 232
And I think only these two above needed.
Then I have a
3. StarTech RJ45 cable, can be connected to 1., and it has a RJ45 ending.
I'm puzzled with this 3. cable, why did I need it, the RJ45 ending, since all I have have the RS232 option to connect.
G61RSL, DSP7200, DSP5200HC
Lumin D2
Akai GX-620, Teac A-3300SX, Nakamichi CR-4A, CR-2A
Oppo BDP-103
Sony PS-X600, Nagaoka MP-110, Denon DL-103R
NuPrime STA-9, Elac BS 63
PS Audio PP10
|
|
|
|
|
Joined: May 2005
Posts: 824 Likes: 161
Paranoid android
|
|
Paranoid android
Joined: May 2005
Posts: 824 Likes: 161 |
The legacy configuration program runs on Windows 11.
The StarTech RJ45 cable was probably used to flash firmware onto your DSP7200's, as they can use SpeakerLink (which uses an RJ45 connection)
Cheers,
Steve
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5k.2C, DSP33, F80
Spare: MCD, 100 Series, 200 Series, 500 Series, C15s.
|
|
|
|
|
Joined: Mar 2023
Posts: 113 Likes: 1
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2023
Posts: 113 Likes: 1 |
Thanks Steve.
It must have been the case, since my other components can't use it.
G61RSL, DSP7200, DSP5200HC
Lumin D2
Akai GX-620, Teac A-3300SX, Nakamichi CR-4A, CR-2A
Oppo BDP-103
Sony PS-X600, Nagaoka MP-110, Denon DL-103R
NuPrime STA-9, Elac BS 63
PS Audio PP10
|
|
|
|
2 members (Rick7, Carl),
60
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,141
Posts296,880
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
