|
|
Joined: Sep 2022
Posts: 30 Likes: 2
Harmless
|
|
Harmless
Joined: Sep 2022
Posts: 30 Likes: 2 |
Hi All,
I have quite a simple setup that was working OK but I recently moved it from one room to another and now can’t get the left channel working when connected to the TV.
I have a 218 unit to allow connection to Sonos and a TV. Sonos is connected with coax digital input and all works perfectly including "works with Sonos control". The TV (Samsung) is connected with optical set to PCM, I can only get the right channel to work.
I cant remember how I had it connected before but have tried SL out from 218 to Master speaker and then a cable from that speaker to the other and with direct connections from the 218 to each speaker.
Both speakers show the correct source selection but I just can't get any audio out of the left (Master) speaker when connected to the TV. I don't have any other optical out devices to test. I have tried a factory reset on the TV and 218 but no luck.
Any suggestions on how to connect and test would be very welcome.
Many Thanks
DSP5200SL, 218, with Sonos. Rest of home Loxone multi room audio with Monitor Audio speakers
|
|
|
|
|
Joined: Nov 2009
Posts: 3,856 Likes: 374
Meridian Partner Vogon Civil Servant
|
|
Meridian Partner Vogon Civil Servant
Joined: Nov 2009
Posts: 3,856 Likes: 374 |
What brand and model tv? Some have sound modes that can complicate a simple setup.LG comes to mind.
www.cmbintegrations.comOne step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
|
|
|
|
|
Joined: Sep 2022
Posts: 30 Likes: 2
Harmless
|
|
Harmless
Joined: Sep 2022
Posts: 30 Likes: 2 |
Hi Bruce,
It’s recent Samsung S95C TV.
It was working previously set to PCM output.
DSP5200SL, 218, with Sonos. Rest of home Loxone multi room audio with Monitor Audio speakers
|
|
|
|
|
Joined: May 2005
Posts: 824 Likes: 161
Paranoid android
|
|
Paranoid android
Joined: May 2005
Posts: 824 Likes: 161 |
It may be worth re-typing the speakers - Type 6 should be fine.
Make sure you have Master and Slave set correctly, and also Left and Right. Set the input to RJ45 (assuming you have them connected via SpeakerLink)
It could be that you've accidentally typed it as Type 5, where different sources use different digital inputs...
Good luck,
Steve
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5k.2C, DSP33, F80
Spare: MCD, 100 Series, 200 Series, 500 Series, C15s.
|
|
|
|
|
Joined: Sep 2022
Posts: 30 Likes: 2
Harmless
|
|
Harmless
Joined: Sep 2022
Posts: 30 Likes: 2 |
Thanks All, Not sure what the problem was but having reset and reconfigured everything it seems to be all working again now
DSP5200SL, 218, with Sonos. Rest of home Loxone multi room audio with Monitor Audio speakers
|
|
|
|
1 members (jburkart),
35
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,141
Posts296,882
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
