|
|
Joined: Apr 2009
Posts: 17
Harmless
|
|
Harmless
Joined: Apr 2009
Posts: 17 |
Gday ladies and Gents,
As the title suggests. The back story is I disconnected my system 861 and 2 DSP33’s over the holiday period. Reconnected and no sound.
I traced it back to 1 x DSP33. It’s not the digital cables, comms cables are from Ian so top notch.
It connects to the laptop and can fetch and store, did the paperclip reset but the green light remains dull whatever I do. So maybe comms board?
I guess I’m looking for direction to go next or ideas?
Thanks in advance.
Cheers
Shane
Wadia 171i, 861v2, DSP5000C, DSP33
|
|
|
|
|
Joined: Jan 2010
Posts: 803 Likes: 7
Paranoid android
|
|
Paranoid android
Joined: Jan 2010
Posts: 803 Likes: 7 |
Shane
Try copy and pasting the title of your thread into the Google Search function at the top of the Hitchhikers page and you'll see that this is a reasonably well known problem with a number of possible causes and solutions. It might be as simple as swapping the speakers around. Good luck.
Streaming: Roon, NUC, QNAP869 NAS
2ch system: dCS Vivaldi, Audionet Stern, Audionet Heisenberg, Magico Q1
Retro system: 101/104/105, Red Rose Spirit
|
|
|
|
|
Joined: Nov 2022
Posts: 195 Likes: 45
Hitchhiker
|
|
Hitchhiker
Joined: Nov 2022
Posts: 195 Likes: 45 |
Run the speaker calibration, at least the white noise will tell you if they are working and also do a hard re-boot of the entire system.
DSP8000USE, DSP5200HC, DSP33, DSW1500, 808v5, 861v4, WiiM Pro+, Panasonic 55" Plasma, DMP-BDT700 Blu-ray,
MECOOL MEon1, Russ Andrews Signature Power Block, UltraFuses, SuperFuses, Kimber Signature PS Interfaces.
Prior: DSP7000.2, DSP6000.2, DSP5000.2, DSP5000.2HC, 508.24, 568.2, 596, G98DH & G68D.
Jaguar F-Type; Meridian 770W Surround System
|
|
|
|
|
Joined: Apr 2009
Posts: 17
Harmless
|
|
Harmless
Joined: Apr 2009
Posts: 17 |
We'll Gents,
My DSP33 is still a low dimed green led brick. I have 2 options.
I1) Ask this amazing community for the latest firmware which i think is 1.10 and reflash or
2) Purchase 2 x Hypex FA123 plate amps as they are the exact dimensions.
So if anyone please has the firmware???
Thanks
Shane
P.s. I have tried everything to get this one to come out of standby.
Cheers
Shane
Wadia 171i, 861v2, DSP5000C, DSP33
|
|
|
|
|
Joined: Feb 2017
Posts: 545 Likes: 23
Paranoid android
|
|
Paranoid android
Joined: Feb 2017
Posts: 545 Likes: 23 |
DSP33 can be a challenge sometimes. Have you tried the obvious.
1. Checking setup in Legacy config
2. Switching roles from slave to master or master to slave
3. Switching comms input to output.
4. Powering the speakers up first followed by your comms connected units.
To bad you are so far away.
M2.0>ROON: C15/DSP6K
C2.2>ROON: ALLO DIGIONE/DSP5K+D2500x2
W2.2>ROON: C10/DSP33+D2500
R2.0>ROON R: MiniDSP SHD>SCHIIT Freya+(Forkbeard)>3eAudio A7 Mono>>>Apogee Scintilla
Projects. ROON streamer with serial RS232 volume control
|
|
|
|
|
Joined: Apr 2009
Posts: 17
Harmless
|
|
Harmless
Joined: Apr 2009
Posts: 17 |
Just a little update:
Reinstalled V1.10 thanks to a fellow HH and still no dice.
I notice that the good speaker's LED flashes from dull green to bright green, like it's being forced out of standby where the bricked one just stays dull.
I have tried everything but to no avail. Willing to try anything before I rip the guts out of both and install Hypex FA123's.
Cheers
Shane
Wadia 171i, 861v2, DSP5000C, DSP33
|
|
|
|
0 members (),
19
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,141
Posts296,882
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
