|
|
Joined: Sep 2016
Posts: 8
Harmless
|
|
Harmless
Joined: Sep 2016
Posts: 8 |
My Linksys router suddenly died and I replaced it with a Negtear AX12. Now one of my 818's is no longer visible on the network nor on Roon.
The 818 may have been on a static IP (10.xxx) that is now outside the range of the new router (192.xxx) as I moved from the US to Europe. Looking to change the IP of the ID41 to DHCP or to factory reset the 818.
HELP PLEASE
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
|
|
|
|
|
Joined: Feb 2010
Posts: 2,165 Likes: 67
Meridian Partner Senior Shouting Officer
|
|
Meridian Partner Senior Shouting Officer
Joined: Feb 2010
Posts: 2,165 Likes: 67 |
Hi, Use Meridian Device Manager to change ID41 card from Fixed to DHCP. Device Manager ThreadRick
|
|
|
|
|
Joined: Sep 2016
Posts: 8
Harmless
|
|
Harmless
Joined: Sep 2016
Posts: 8 |
Meridian Device Manager does not find the unit..
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
|
|
|
|
|
Joined: Feb 2010
Posts: 2,165 Likes: 67
Meridian Partner Senior Shouting Officer
|
|
Meridian Partner Senior Shouting Officer
Joined: Feb 2010
Posts: 2,165 Likes: 67 |
Make sure both the PC you are running Device Manager on, and the 818v3 are hard wired direct to the router with Ethernet cables. No Ethernet over power, Wi-Fi bridges etc.
Rick
|
|
|
|
|
Joined: Sep 2016
Posts: 8
Harmless
|
|
Harmless
Joined: Sep 2016
Posts: 8 |
Hi Rick, I plugged the 818 directly into the router and also the PC - still, no light on the port, Device manager does not find it.
Thanks for your help
Gert
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
|
|
|
|
|
Joined: Dec 2004
Posts: 6,569 Likes: 13
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Dec 2004
Posts: 6,569 Likes: 13 |
Have you got the FING app to interrogate your network. It’s free, worth a look to see what’s there...
No 18 in the Hall of fame  I have simple tastes; I am content to settle for the best: GIK monster bass panels, rear wall. QNAP TVS 471i3. Roon into DSP5200SE via 210/ 218 zone... Explorer 2. Bluesound Pulse 2, Mini & Flex. 596v1, 518, Foxsat HD, Sony BDP, Pioneer 5090, 2 Chromecast's for LRB videos. MS200 to F80 for a Roon zone
|
|
|
|
|
Joined: Sep 2016
Posts: 8
Harmless
|
|
Harmless
Joined: Sep 2016
Posts: 8 |
Thanks Rick, I have FING and ran it several times, but all addresses it shows are 192.168. Adresses, not the 10.xxx address that I think the 818 is set to.
Cheers
Gert
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
|
|
|
|
|
Joined: Aug 2009
Posts: 1,071 Likes: 67
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Aug 2009
Posts: 1,071 Likes: 67 |
To use Fing to find the ID41, you should manually change the IP address of the device running Fing to a fixed address in the 10.xxx.xxx.xxx range, then search that subnet. Once you're done, don't forget to change your device back to DHCP!
Alternatively, would it be easier to change your new router to use the old 10.xxx address range and subnet mask?
Last edited by Jeremy A-H; 2020-12-11 18:51.
Prolific music listener / Hi-Fi addict!
|
|
|
|
|
Joined: Feb 2010
Posts: 2,165 Likes: 67
Meridian Partner Senior Shouting Officer
|
|
Meridian Partner Senior Shouting Officer
Joined: Feb 2010
Posts: 2,165 Likes: 67 |
Hi Gert, You say "still no light on the port" Which port? The lights on the ID41 network port should flash even if you are on the wrong subnet. Rick
|
|
1 member likes this:
Carl |
|
|
|
|
Joined: May 2008
Posts: 8,506 Likes: 78
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2008
Posts: 8,506 Likes: 78 |
The lights on the ID41 network port should flash even if you are on the wrong subnet. +1 Gert, I suggest you try a different cable / port combination. Regards, Carl
861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2. [In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)
|
|
|
|
|
Joined: Sep 2016
Posts: 8
Harmless
|
|
Harmless
Joined: Sep 2016
Posts: 8 |
Indeed Rick, no lights at all. May be a coincidence that the ID41 died at the same time I switched router..
Thanks for all your help and suggestions.will keep you posted on my findings.
Best
Gert
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
|
|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
May be a coincidence that the ID41 died at the same time I switched router I would wager that it's the new router/switch. Many switches don't play nicely with Meridian Sooloos. The reason is that they drop UDP packets when making a 1000 --> 10MB transition. Edit: I didn't see your 192/24 10/8 network change. Certainly, that is the first port of call.
Last edited by VirusKiller; 2020-12-12 11:48.
|
|
|
|
Forums18
Topics31,226
Posts297,302
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|