I'm unable to update my ID14 and 218. Tried on 3 PC's with v37, on all 3 both devices are found but nothing happens. I even tried with 218 to connect directly using crosscable and using static IP's but after finding and listing it in device manager nothing happens. Strange everyone is reporting upgrades without issues. Firewall disabled etc so i'm sure nothing is blocking..
EDIT: found it, disabled igmp-snooping on the interfaces connecting 218 / ID41 and PC. worked.
Living: Trinnov Alt32, 271, DSP7200SE, DSP7200HCSE, DSP5200SL, DSP320.2 heights, DSW.2, LG OLED 77C8P, Xbox One X, AppleTV 4K. Office: DSP5200SE, 218 Zone Controller
Why a cross cable? I updated mine from a laptop wired to the network on normal Cat5e cabling.
No 18 in the Hall of fame I have simple tastes; I am content to settle for the best: GIK monster bass panels, rear wall. QNAP TVS 471i3. Roon into DSP5200SE via 210/ 218 zone... Explorer 2. Bluesound Pulse 2, Mini & Flex. 596v1, 518, Foxsat HD, Sony BDP, Pioneer 5090, 2 Chromecast's for LRB videos. MS200 to F80 for a Roon zone
If you use no switching devices between the endpoints you need to use a crossover cable?
Living: Trinnov Alt32, 271, DSP7200SE, DSP7200HCSE, DSP5200SL, DSP320.2 heights, DSW.2, LG OLED 77C8P, Xbox One X, AppleTV 4K. Office: DSP5200SE, 218 Zone Controller
I just saw this reply on the Roon forum ref volume levelling
Hello @Erich_Fluck,
At this moment in time, MQA playback on the Meridian 218 requires sending a “bit-perfect” MQA audio stream to the device. Disabling Roon’s “Volume Leveling” feature (Volume -> Gears icon) should allow the 218 to Decode and Render MQA content again.
Meridian has announced their intention to ship a firmware update to the 218 with MQA Renderer only mode, so keep your eyes out for that.
Any thoughts
No 18 in the Hall of fame I have simple tastes; I am content to settle for the best: GIK monster bass panels, rear wall. QNAP TVS 471i3. Roon into DSP5200SE via 210/ 218 zone... Explorer 2. Bluesound Pulse 2, Mini & Flex. 596v1, 518, Foxsat HD, Sony BDP, Pioneer 5090, 2 Chromecast's for LRB videos. MS200 to F80 for a Roon zone
No, you won't be able to "set" anything in a 210 or 218. What Chris meant is that the devices will now act as renderers (automatically) for decoded MQA, as well as accepting and decoding raw MQA.
Roon Developer and ex-moderator of this Forum I am #25 in the HH1 photo of fame.
My IP Control App is now crashing on EVERY startup!
This was after the update to v218 on 218 device and ID41 device.. I think the app need to be updated as well. Can someone Premium find out please?
I tried on both my XS Max phone and Ipad Pro. Both have latest software and checked in appstore for updates.
After pulling the plug to the updated ID41 in my 861v8 the IP Control App no longer crashes. My ID41 is not configured as a source since I use my 210 for MQA decoding. But if you get app crashes, this might be what is causing it...
DSP8000SE, DSP7200SEHC, DSP5200SE sides, DSP7200SE rears, 861v8, 210, Sim2 Ultranero 4, Stewart Cinecurve 2.35:1, XEIT CM-5E Anamorphic lens, Dune HD Duo Cinema 8K and Wireworld Platinum 48G HDMI -> UHD722 -> Shunyata Omega Ethernet. Shunyata/Furutech power-cables/filters. SR Master Fuse@861v8. Uptone Etherregen with 10MHz OCXO clock.
Initially, I had a little scare as neither of my ID41's were showing in Roon nor in the device manager after I started the update. Switched it all off and back on and it works like a charm. Took 2 minutes in total.
Music Room: 818v3, DSP 8000SE /, Samsung 85" TV, Apple TV TV Room: 210, DSP 5200SE, Samsung 82", Apple TV Master Bedroom: 218, DSP3200 Living: 818v3, DSP 7200SE, 210, Sennheiser HD800 & HDVD 800 Storage: QNAP 48TB, Roon Nucleus+ Power Conditioning: Audioquest Niagara 1100, Niagara 1000, all power cords Audioquest Mosoon
I have been trying this ID41 update in my 818v3 without much joy (using Windows 10 on Microsoft Surface laptop).
I thought I’d try selecting the MC200 rather than ID41. I didn’t make note of any versions, so I’m not even sure if there was an update BUT after updating this, my ID41 then updated without any issue. Now on Version 1.2 Build 218.
I’d been trying all sorts, thinking it was a Windows firewall issue, digging into router settings etc.
Just thought I’d share in case anyone was still having issues.
Music Room: 818v3, DSP8000SE (SpeakerLink cables), iPad control Shunyata Denali Power Distributor, fed by SIgma NR V2 + Sigma digital(818) + 2x Alpha NR(DSP8000SE) Network Acoustics ENO filter + Rubicon Switch(powered by IFI IPower Elite)
Office: Stax SRS2020 via ifi Signature Spare: DSP5200 + MC200
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
I have simple tastes; I am content to settle for the best:
