Hi,

The COM board (the one attached to the back panel) has fried on one of my DSP33s. There's a missing clock, and before I remove the processor and spend a week debugging it without a schematic (it's the only one missing on the website!), it's worth me checking for a damaged DSP33 that might be going cheap.

I don't care if you've experimented on the case with an angle grinder, or if a hammer has been put through the cones, as long as the COM is good. If you can communicate with the speaker over RS232 then yours is. Happy to pay a bit extra for a complete faulty speaker for spares, but I'm not looking to spend a fortune.

I've checked Meridian Legacy, and he doesn't seem to have one.

Best Regards,
Mark

861v8, DSP5200, DSP5200HC, DSP5000mk2, UHD722, MF10, Prime, Prime PSU