On Monday, 30th March, we plan to release an updated version of MConfig, the Meridian Configuration tool, to support the new 818v3, 808v6, and the DSP320. We also have a new release of firmware for the G65 which will be made available to our authorised distribution network at around the same time. Here�s a summary of the changes introduced�
MConfig: � Support for 818v3. � Support for 808v6. � Support for DSP320. � Propagate audio input to main controller when adding an HD621 as a source. Prevents potential unwanted noises from occurring when switching source. � Additional checks to assist with ensuring only one Controller exists within a system. � Changed default Controller setting in GUI to Automatic rather than Controller, allowing a loudspeaker to safely become the Controller after performing an auto set-up from the remote.
Firmware G65: � Comms. Now receives and displays Axis command from Comms. � SpeakerLink. Fixes to Legend mechanism. � DSP. Fixed EBA/LipSync interaction. � DSP. Centre Elevation menu added to Mono mode.
For those that may be unsure; Mconfig is installed via the Common Installer which can be found by going to the Meridian Support website page (see link at the bottom of this page), then clicking on the link to the configuration page.
If your looking for the new firmware then please contact your local Meridian dealer or failing that one of HH friendly ones that post on this site. If you're still not sure who they are please PM me for advise.
If you already have M config installed just start it then select 'help' and then 'check for updates', can Des or someone at Meridian confirm checking for updates will work, last time it didn't and we were directed to a download page (I have checked and nothing is there).
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
