|
|
Joined: Dec 2013
Posts: 2
Harmless
|
|
Harmless
Joined: Dec 2013
Posts: 2 |
Hello,
I've recently acquired a G57 PA and when I plug it in the unit humms audibly, not through the speakers but the unit itself, but after playing for a short time the humming stops, is this normal for this amp?
Many thanks Chris
|
|
|
|
|
Joined: Aug 2003
Posts: 94
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2003
Posts: 94 |
Both my 559 and 558.2 power amps hum. It's annoying but you get used to it.
Phil
Lyngdorf MP-40, ROON Sever,598DP, Emotiva Gen 3 9 CH amp Musical Fidelity M8500S, Tannoy Definition DC10T and matching centre, Monitor Audio Gold FX surrounds, Velodyne DD15 sub, Sony KD75Z9, Toshiba EP35/Sony UHD X700, Townshend Isolda EDCT interconnects, speaker cable, Musicworks Reflex plus G3 ext block, Q4-ref isolation rack.
|
|
|
|
|
Joined: Dec 2013
Posts: 2
Harmless
|
|
Harmless
Joined: Dec 2013
Posts: 2 |
Thanks Phil, I was hoping it was not a fault.
|
|
|
|
|
Joined: May 2001
Posts: 3,140 Likes: 24
Hooloovoo
|
|
Hooloovoo
Joined: May 2001
Posts: 3,140 Likes: 24 |
It is a fault, just not evidence of incipient failure. There were a few threads on humming 557s a while ago for which it may be worth googling the site. This for instance: 557 with noisy torroid.
In the spirit of Spinaltap, I would like to confirm that I am not involved in the corrupt theft of a global sport.
|
|
|
|
|
Joined: Aug 2003
Posts: 94
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2003
Posts: 94 |
My 558.2 has made a humming noise since it was new. It does not do it all the time and my 559 does not do it all the time.
It seems related to the quality of the mains.
I leave mine plugged in on standby when not being used and that is when I notice the hum. Phil
Lyngdorf MP-40, ROON Sever,598DP, Emotiva Gen 3 9 CH amp Musical Fidelity M8500S, Tannoy Definition DC10T and matching centre, Monitor Audio Gold FX surrounds, Velodyne DD15 sub, Sony KD75Z9, Toshiba EP35/Sony UHD X700, Townshend Isolda EDCT interconnects, speaker cable, Musicworks Reflex plus G3 ext block, Q4-ref isolation rack.
|
|
|
|
|
Joined: Nov 2009
Posts: 89
Hitchhiker
|
|
Hitchhiker
Joined: Nov 2009
Posts: 89 |
I have four of them in use and my guests slept in the room with them over Xmas. I had to turn them all off as they complained they sounded like a swarm of bees! It not a problem in use because the room is large with plenty of soft furnishings, carpet etc. A room with a hard wood or tiled floor will make them sound louder.
Also, the bolt that holds the transfomer underneath the amp is about the same size as the feet so that the bolt touches the furniture, annoyingly damaging it. This can make the humming or vibrating worse. Putting something under each foot is the solution and this also improves ventilation around the unit, which have cut out before due to heat, mainly in the summer.
B&W N802, Nhtm1 2xM.805, 2xM.htm, 2xASW4000, Meridian 568, 502, 504, 508, 5x557, VDH Revolution & D102mk3 XLR cables.
|
|
|
|
Forums18
Topics31,150
Posts296,945
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|