Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Topic Options
Rate This Topic
#290418 - 2020-01-13 13:08 Firmware DSP5200 update
Registered: 2012-07-25
Posts: 16
DCdeus Offline
Harmless
DCdeus Offline
Harmless

Registered: 2012-07-25
Posts: 16
Loc: Graz, Austria
Hi,

I purchased used DSP5200.2 about 7 months ago. Any ideas where to get the lastest 3.16 firmware for my speakers?

Thanks,
Andi


DSP5200.2
Top
#290657 - 2020-01-24 11:39 Re: Firmware DSP5200 update [Re: DCdeus]
Registered: 2012-07-25
Posts: 16
DCdeus Offline
Harmless
DCdeus Offline
Harmless

Registered: 2012-07-25
Posts: 16
Loc: Graz, Austria
Well, i try to start another attempt:

I purchased used DSP5200 (SpeakerLink) about 7 Months ago. Pressing the "Display" on the RC the Display shows "1.3". I think this a very old Firmware.

My Problem: I'm not able to download the latest firmware from the Meridian Homepage. I already bought a Cisco 1200 Platform Cable and a UGREEN USB to RS232 Converter, also installed the Meridian "Flash Upload Program" on my Notebook.

Which Firmware would be suitable?
On the Meridian Page v2.63 is the latest Version. Or is it possible to install the newer 3.16 Version with MQA-Support?

I would be grateful if anyone can help me to get a newer firmware for my speakers.

Kind regards,
Andi


DSP5200.2
Top
#290658 - 2020-01-24 12:24 Re: Firmware DSP5200 update [Re: DCdeus]
Registered: 2009-11-10
Posts: 1,994
CMB Integrations - Bruce Offline
Meridian Partner Knows where his towel is
CMB Integrations - Bruce Offline
Meridian Partner
Knows where his towel is

Registered: 2009-11-10
Posts: 1,994
Loc: Lexington, South Carolina, USA
First of all you need to determine if your speakers are truly DSP5200.2 as recognized by Meridian or are just the SpeakerLink version. There is a big difference.

If it does not report DSP5200.2 on the front display when powering up from the back panel switch, do not load v3.16 firmware.

If your speakers are the SpeakerLink version, v2.63 is the appropriate firmware.

I think that with your speakers reporting 1.3 firmware, they are 5200 SpeakerLink versions.


www.cmbintegrations.com

System #1 Trinnov Altitude 32-8-16, 271, 808v6, DSP8000SEUG, DSP7200SEHC, Revel B112, Monitor Audio Silver 10, Paradigm 85F, ATI 200WX7 Amp, JVC RS15, Shunyata Triton V3, Sigma power cables, Black Diamond Zero Edge screen. QNAP TS-251 3TB, Roon Nucleus.

System #2 Mark Levinson No515, No5805, Revel F228be.


Top
#290687 - 2020-01-27 09:38 Re: Firmware DSP5200 update [Re: CMB Integrations - Bruce]
Registered: 2012-07-25
Posts: 16
DCdeus Offline
Harmless
DCdeus Offline
Harmless

Registered: 2012-07-25
Posts: 16
Loc: Graz, Austria
Thanks for your help. PM sent.

If it doesn't bother: What are the main differences between the 5200SL and the 5200.2 Version? Has the later one updated DSP-Boards?

Thanks,
Andi


DSP5200.2
Top
#290689 - 2020-01-27 11:04 Re: Firmware DSP5200 update [Re: DCdeus]
Registered: 2009-11-10
Posts: 1,994
CMB Integrations - Bruce Offline
Meridian Partner Knows where his towel is
CMB Integrations - Bruce Offline
Meridian Partner
Knows where his towel is

Registered: 2009-11-10
Posts: 1,994
Loc: Lexington, South Carolina, USA
Tweeter and electronics.


www.cmbintegrations.com

System #1 Trinnov Altitude 32-8-16, 271, 808v6, DSP8000SEUG, DSP7200SEHC, Revel B112, Monitor Audio Silver 10, Paradigm 85F, ATI 200WX7 Amp, JVC RS15, Shunyata Triton V3, Sigma power cables, Black Diamond Zero Edge screen. QNAP TS-251 3TB, Roon Nucleus.

System #2 Mark Levinson No515, No5805, Revel F228be.


Top
#290943 - 2020-02-10 13:22 Re: Firmware DSP5200 update [Re: DCdeus]
Registered: 2012-07-25
Posts: 16
DCdeus Offline
Harmless
DCdeus Offline
Harmless

Registered: 2012-07-25
Posts: 16
Loc: Graz, Austria
Hi,

So, the current status:

It seems the Meridian Program (Flash Uploader) can't be connect to the speakers frown

I also have the Center Speaker DSP5200SL: For this speaker I could trigger the "fetch data" and I get a correct respone from the device (speaker).

Any ideas why the the speakers don't response?

Thank you in advance for the help,
Andi


DSP5200.2
Top
#290944 - 2020-02-10 13:49 Re: Firmware DSP5200 update [Re: DCdeus]
Registered: 2010-12-09
Posts: 3,929
Ratbert Offline
Vogon Civil Servant
Ratbert Offline
Vogon Civil Servant

Registered: 2010-12-09
Posts: 3,929
Loc: Europe
If the connection works for one speaker but not the other then make sure you have connected to the Master SL connector, if that is ok try slowing down the speed in the FUP settings.


If you give a man a fish he will eat for a day. But if you teach a man to fish he will buy an ugly hat. And if you talk about fish to a starving man then you are a consultant.
—————————————
If at first you don't succeed, try again. Then quit. No use being a fool about it.
Top

Moderator:  Carl, Duncs, ncpl 
Who's Online
1 registered (Mr_Gimlet), 56 Guests and 2 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Xebxorro, LeonardoDelgado, SunValleyLaw, PaulMichaelMiller, Earfully
4820 Registered Users
Top Posters (30 Days)
Mike_500 43
Ratbert 38
spinaltap 20
CMB Integrations - Bruce 20
3dit0r 18
Top Posters
VirusKiller 12640
Fiddler 8672
ncpl 8577
Carl 8005
Ian 7866
Forum Stats
4,820 Registered Members
18 Forums
26,893 Topics
268,797 Posts

Most users ever online: 607 @ 2020-01-20 17:19
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant