Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Page 3 of 3 < 1 2 3
Topic Options
Rate This Topic
#271297 - 2017-12-31 15:12 Re: Roon with MS200 [Re: spinaltap]
Registered: 2004-04-15
Posts: 12,345
VirusKiller Offline
Don't Panic
VirusKiller Offline
Don't Panic

Registered: 2004-04-15
Posts: 12,345
Loc: nr. Milton Keynes, UK
Given the MS200 has an IR sensor, that might even be cheaper than the G12...


Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.
Top
#271299 - 2017-12-31 15:47 Re: Roon with MS200 [Re: Tim]
Registered: 2004-01-04
Posts: 1,903
gIzzE Offline
Knows where his towel is
gIzzE Offline
Knows where his towel is

Registered: 2004-01-04
Posts: 1,903
Loc: Norwich, UK
The SW1600 can just daisy chain in with the sub.

You could even add a regular sub with the 218 and plug it into the pre outs and set them to variable and have your 33s plugged in as normal.

I guess you could do that with the MS200 as well using the headphone out on it.

You still need a speakerlink to comms/coaxial to be able to control the volume from roon etc.


No Darling, I've had it months!
Top
#271300 - 2017-12-31 15:48 Re: Roon with MS200 [Re: VirusKiller]
Registered: 2004-01-04
Posts: 1,903
gIzzE Offline
Knows where his towel is
gIzzE Offline
Knows where his towel is

Registered: 2004-01-04
Posts: 1,903
Loc: Norwich, UK
Originally Posted By VirusKiller
Given the MS200 has an IR sensor, that might even be cheaper than the G12...
Yeah, could be a better option all round.


No Darling, I've had it months!
Top
#271422 - 2018-01-05 07:02 Re: Roon with MS200 [Re: gIzzE]
Registered: 2003-09-10
Posts: 511
Tim Offline
Paranoid android
Tim Offline
Paranoid android

Registered: 2003-09-10
Posts: 511
Loc: Cambridge, UK
If I used a MS200 with Roon into a pair of DSP33's, how would I get feedback regarding the volume level? Could the 561 be connected somehow (i.e. such that it does not have to pass the audio and therefore limit the sampling frequency to 48kHz)

Thx,

Tim


SB3, 561, DSP33, SW1600.
HH1 Number 48
Top
#271423 - 2018-01-05 07:20 Re: Roon with MS200 [Re: Tim]
Registered: 2004-04-15
Posts: 12,345
VirusKiller Offline
Don't Panic
VirusKiller Offline
Don't Panic

Registered: 2004-04-15
Posts: 12,345
Loc: nr. Milton Keynes, UK
If it's just Roon, MS200 and D33s, the volume control info is bi-directional from MS200 to Roon. Roon will display the volume.


Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.
Top
#271433 - 2018-01-05 12:20 Re: Roon with MS200 [Re: VirusKiller]
Registered: 2009-09-13
Posts: 5,379
Ludwig Offline
President of the Imperial Galactic Government
Ludwig Offline
President of the Imperial Galactic Government

Registered: 2009-09-13
Posts: 5,379
Loc: Europe
If you use an AC12 the 562 Comms can be connected so you can view and control volume from there.

Disclaimer: I’ve only done this with a 518. But I think it’d be the same.


Ex-moderator
Sitting room: 818v3, 8kSE
Office: 818v3, Stax SRM-T1, Stax SR404LE
TV room: HD621, 518, D33
Kitchen: MS200, Genelec 6010 actives
Server: Roon/NUC/Touchscreen

Oldest audio file: 1889 Edison cylinder
Top
#271601 - 2018-01-09 21:39 Re: Roon with MS200 [Re: VirusKiller]
Registered: 2003-09-10
Posts: 511
Tim Offline
Paranoid android
Tim Offline
Paranoid android

Registered: 2003-09-10
Posts: 511
Loc: Cambridge, UK
thanks Joel


SB3, 561, DSP33, SW1600.
HH1 Number 48
Top
#271602 - 2018-01-09 21:41 Re: Roon with MS200 [Re: Ludwig]
Registered: 2003-09-10
Posts: 511
Tim Offline
Paranoid android
Tim Offline
Paranoid android

Registered: 2003-09-10
Posts: 511
Loc: Cambridge, UK
Originally Posted By Ludwig
If you use an AC12 the 562 Comms can be connected so you can view and control volume from there.

Disclaimer: I’ve only done this with a 518. But I think it’d be the same.
That's interesting!

Has anyone else tried this?

Thanks
Tim


SB3, 561, DSP33, SW1600.
HH1 Number 48
Top
#271604 - 2018-01-09 22:02 Re: Roon with MS200 [Re: Tim]
Registered: 2000-11-01
Posts: 2,616
RobertW Offline
Robert.W Great Green Arkleseizure
RobertW Offline
Robert.W
Great Green Arkleseizure

Registered: 2000-11-01
Posts: 2,616
Loc: Austria, Europe
Tim, as VK posted, with Roon you see the volume on your tablet and need no other equipment.
If you don't like that, you can use either AC12, Reviver or homemade SL-DIN comms cable and a device just to see the volume.

AC12 and Reviver also makes beside the communication the impedance matching of the digital audio signal when you want to use SL/Cat cable.


861v6+ID40/800v3/3x8k.2/3x5k5s smile /2x5kC/ 218/Explorer/TT-ELP/Trinnov Amethyst
__HB-strip, Ayon/HB/Shunyata/Dream State Audio/Miltzow -- power cables,
__Ayon/Jungson/Miltzow --analog, Miltzow-- digital,
__WMA/Finalizer- , iPad air, Macbook-pro.
Reviver
Top
Page 3 of 3 < 1 2 3

Moderator:  Carl, Duncs, ncpl 
Who's Online
3 registered (Kent in Welly, Carlton9000, Jdb-si), 33 Guests and 4 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
YBA_US, Tybot, COTJ, Hualon, ChalkyFingers
4636 Registered Users
Top Posters (30 Days)
3dit0r 101
Ratbert 73
CMB Integrations - Bruce 60
Tarik 33
Jazzmaniac1954 29
Top Posters
VirusKiller 12345
Fiddler 8666
ncpl 8451
Carl 7707
Ian 7481
Forum Stats
4,636 Registered Members
17 Forums
24,912 Topics
254,514 Posts

Most users ever online: 211 @ 2015-05-05 14:40
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant