Originally Posted by ermap
Gary,

I've spent my time mainly setting up and configure the EDGE, replacing the HD+ and I've done roughly some tests, but not enough to express comments for the time being. It is seems that almost everything works apart a relevant issue which I'd like to set up before relax and to better listen to.

The issue is related to the audio inputs and output - no one of them work, no output from optical - FYI I don't see even any light on from that outlet, as it should be for the optical outs - the 5 audio inputs analog, digital and optical have no link with the HDMI out - only HDMI in to HDMI out work - it's seems all this audio section is dead.

Since I need to switch audio also to the TV when Home Theater is off, this function is important for me.

Any idea how to fix it Gary? - Does your mod. interferes with these?

Video section it`s O.K. even if I'm missing a bit the flexibility of the HD+.
I've tested a couple of Blu-Ray - the Mod. seems work good, the audio from SPDIF in PCM goes correctly to Meridian G68, but always Music6 is selected. Any idea how to make G68 step on Movie6 which is what I prefer for my purposes?

Thanks
Ermanno


Ermanno, concerning the audio this is how the unit works, the reason the optical audio section is shut off is because the Edge is setup for audio to be output via the "audio only" HDMI output, this is where the Gefen is connected so that the SPDIF mod works perfectly

if you need optical output you will need to go into the setup menus and set the audio output to optical instead of audio only HDMI, but the mod no longer works after you do this

thanks

-Gary Murrell
http://www.custom-ht.com/oppopowerbuy.html
My Personal HT setup