logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 18 of 60 1 2 … 16 17 18 19 20 … 59 60
Joined: Jan 2008
Posts: 41
Harmless
Harmless
Offline
Joined: Jan 2008
Posts: 41
Gary,

From your testing have you found any material benefits by using the Oppo with a video processor/scaler (eg an Iscan VP30 or VP50) or does the Oppo do a good job on its own?

I've always wondered about a scaler (probably nothing more than the VP30 for cost reasons) but wonder if it would be money better spent elsewhere in the system, particularly if the Oppo makes a good fist of it. My plasma is also only 1080i.

Thanks.


568.2mm, M80
Joined: Sep 2003
Posts: 147
Hitchhiker
Hitchhiker
Offline
Joined: Sep 2003
Posts: 147
Hi Gary

I have just noted your comment about 220 Volt. In Australia we have 240 Volt +- 10%.I know that might sound strange but that's the standard here. Can the modified unit accommodate this?


861v8+ID41 Revelation One filter, HD621, Musical Fidelity M8 700 mono blocks, Focal Scala (x2), Focal Mini Utopia (x3), Velodyne DD18, Oppo BD105, Roon NUC, 218, Radiance 2021, JVC X9000
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
Originally Posted by markg
From your testing have you found any material benefits by using the Oppo with a video processor/scaler (eg an Iscan VP30 or VP50) or does the Oppo do a good job on its own?
The Oppo has about the same scaling hardware as a VP30...
Originally Posted by colin
I have just noted your comment about 220 Volt. In Australia we have 240 Volt +- 10%.I know that might sound strange but that's the standard here. Can the modified unit accommodate this?
Almost all of Europe has gone/is going from 220V to 240V in the last 10 years.


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
Joined: Mar 2009
Posts: 343
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2009
Posts: 343
Originally Posted by colin
Hi Gary

I have just noted your comment about 220 Volt. In Australia we have 240 Volt +- 10%.I know that might sound strange but that's the standard here. Can the modified unit accommodate this?


220 or 240, no problem at all

thanks

Joined: Mar 2009
Posts: 343
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2009
Posts: 343
Originally Posted by markg
Gary,

From your testing have you found any material benefits by using the Oppo with a video processor/scaler (eg an Iscan VP30 or VP50) or does the Oppo do a good job on its own?

I've always wondered about a scaler (probably nothing more than the VP30 for cost reasons) but wonder if it would be money better spent elsewhere in the system, particularly if the Oppo makes a good fist of it. My plasma is also only 1080i.

Thanks.


I actually do like to use the Oppo on source direct with a good scaler, like the VP50pro

but the scaler brings so much more to the table for your entire system

the Oppo is very good on its own though

thanks

Joined: Mar 2009
Posts: 69
Mostly harmless
Mostly harmless
Joined: Mar 2009
Posts: 69
Gary,

Any chance to have a modified Oppo BDP-83, Meridian edition, in my hands within the next 4 weeks?

Roger


G68XXV, Oppo BDP83, Forsell CD, Audio Syn DAX-2, LG LSS-3200A TV box, Krell amps, Apogee Diva(M) & Duetta(R), Dunlavy HRCC(C), Audio Physics Virgo(S), Velodyne DD-15 sub, Transparent cables, Fujitsu LPF-D711 projec, Draper 10'screen.
Joined: Mar 2009
Posts: 343
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2009
Posts: 343
Roger, maybe so, can't say 100% sure yet though

thanks

Joined: Oct 2006
Posts: 250
Likes: 4
Hitchhiker
Hitchhiker
Joined: Oct 2006
Posts: 250
Likes: 4
Gary, could you summarise how SACD will work with the player in a Meridian system? Are there SACD benefits with the player as it's one of the things I was holding off until I understood.


Main system: 818v3, 861v6, HD621, Oppo 103D, DSP8000PP, DSP7200SE HC, DSP3200, SGR Sub
Family room: HD621, 861v6, DSP5200 L/C/R
Headphones: Schiit Mjolnir v1, Sennheiser HD800; (office) iFi iDSDPro, Focal Elegia
Joined: Jun 2008
Posts: 118
Hitchhiker
Hitchhiker
Offline
Joined: Jun 2008
Posts: 118
Gary,

Will the Meridian mod be an ongoing offering?


Main system (when room is done): 861v4, 7 x DSP33, SW1600, Oppo, Sonos
Joined: Mar 2005
Posts: 1,053
Likes: 1
Pan-dimensional being
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053
Likes: 1
Originally Posted by Mr_Gimlet
Gary, could you summarise how SACD will work with the player in a Meridian system? Are there SACD benefits with the player as it's one of the things I was holding off until I understood.
With a Meridian system you set the Oppo to decode the SACD/DSD to PCM. This is then usually sent over HDMI, but on a modified Oppo over the three coax to Meridian's (digital) input.


HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
Joined: Oct 2006
Posts: 250
Likes: 4
Hitchhiker
Hitchhiker
Joined: Oct 2006
Posts: 250
Likes: 4
Originally Posted by tommypeters[/quote
With a Meridian system you set the Oppo to decode the SACD/DSD to PCM. This is then usually sent over HDMI, but on a modified Oppo over the three coax to Meridian's (digital) input.

Thanks Tommy, that's what I had hoped. The combination of Bluray and SACD makes this a much better proposition than SACD alone.


Main system: 818v3, 861v6, HD621, Oppo 103D, DSP8000PP, DSP7200SE HC, DSP3200, SGR Sub
Family room: HD621, 861v6, DSP5200 L/C/R
Headphones: Schiit Mjolnir v1, Sennheiser HD800; (office) iFi iDSDPro, Focal Elegia
Joined: Nov 2000
Posts: 2,766
Likes: 6
Robert.W
Great Green Arkleseizure
Robert.W
Great Green Arkleseizure
Joined: Nov 2000
Posts: 2,766
Likes: 6
Originally Posted by Mr_Gimlet
Gary, could you summarise how SACD will work with the player in a Meridian system? Are there SACD benefits with the player as it's one of the things I was holding off until I understood.
Be carefull with SACD
Looking at the homepage:
http://www.custom-ht.com/oppo.html
Reading the preliminary specs
....
-source direct 1080p/24 4:2:2 Blu-Ray output via HDMI (as close to HD-SDI quality possible)
-source direct output of Blu-Ray audio codecs like Dolby TrueHD/DTS Master/LPCM via HDMI 1.3
-source direct 480i/576i 4:2:2 SD DVD output via HDMI (as close to SDI quality possible)
-source direct SACD as DSD via HDMI output
-source direct DVD-Audio as High frequency LPCM
-high-end digital CD audio transport
...

That means DSD not PCM output,just noise or nothing you will hear


800v3/218/271/8k.2/5k5s smile /5kC/DSP3200/Reviver/
TT-ELP/Graham Slee Revelation/Trinnov Altitude 32/OPPO 205
__Ayon/HB/Shunyata/Miltzow -- power cables,
__Ayon/Jungson/Miltzow --analog, Miltzow-- digital,
__Vortex/WMA ,
Page 18 of 60 1 2 … 16 17 18 19 20 … 59 60

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
2 members (NotQuiteToneDeaf, Jabber), 809 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,225
Posts297,298
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.058s Queries: 40 (0.033s) Memory: 0.9037 MB (Peak: 2.2174 MB) Data Comp: Off Server Time: 2026-10-23 17:26:49 UTC
Valid HTML 5 and Valid CSS