Probably shouldn't discuss in here.

But it is possible as I did it with a Crystalio, but that was a couple of years back.

Once you get the image up with 50hz just adjust the H and V size with a pattern till it snaps in, it is really obvious when it does.



Originally Posted by ermap
Originally Posted by gIzzE
[quote=ermap]
HDP timings are fairly standard:

VTOT=800; VACT=768; VSYN=5; VFRN=5
HTOT=1280; HACT=1024; HSYN=85; HFRN=35
VRATE=50.00

The screen positioning & sizing is left at 0,0,0,0 on the user menu, and as follows in the service menu: HPOS=BD; VPOS=71; HSIZE=80; VSIZE=6E


Hi again gIzze,

I did try, sizing successfully in service menu.
No way instead to get toes HD+ timings (Horizontal). The standards are not which you're indicated, but as XGA are:

VTOT=805; VACT=768; VSYN=6; VFRN=3; VBCK=28
HTOT=1344; HACT=1024; HSYN=136; HFRN=24; HBCK=160


Then yes, you can move these value on the Hor. HD+ up to a certain extent, but far from those values, continuing you loose the screen and no chance to lock at 50Hz; as soon as you fix 50Hz you get a black screen.

On the paper it seems simple. I went over some forums, but I didn`t find somebody who has got Pix Map at 50Hz on DVI on this monitor. Am I missing something?

Sorry to disturb you again. Thanks and ciao

Ermanno

No Darling, I've had it months!