In having a 861V4 and 808i I send the signal with a digital cable from the 808i and use the 808i as a transport and use the 861's DAC.
Is there any reason that any other suitable transport could do the same. Is there an advantage to using the 808i as a transport
This is another topic of hot religous debate.
My answer is that as a digital CD transport
into the 861v4, I doubt much difference, if any, would be heard over, say a Meridian 596. The key technologies involved in this scenario are: Multiple re-reading of the disc (596: check, 808: check); FIFO dejittering in the 861v4; and upsampling (there won't be much difference between upsampling in the 808 and in the 861v4).
This answer assumes that the 861v4 FIFO de-jittering reduces the sonic effects of both the 808 jitter and the higher jitter 596 to below human audibility. I think this is likely.
Note 1: The 808i.2 is a different kettle of fish as it has the apodizing filter which the 861v4 does not have (yet). So, all other things being equal, the 808i.2 has better upsampling than the 861v4.
Note 2: Direct to DSP speakers, the 808i is probably the best CD transport you can get, except the 808i.2. In this scenario, the significant technology (apart from multiple re-reads from the disc) is low jitter from the transport to the DSP speakers, as the de-jittering in the DSP speakers is almost certainly not nearly as effective as in the 861v4 (by design).
Others' mileage will almost certainly vary...