So the 3 by SPDIF Outputs from the Toshiba / Oppo must correspond to the same Channel designations as the Meridian Pro expects???? i.e.

SPDIF Output 1 goes to D1 or D4 on the IE42 Board and equals Channels Front Left and Right of the Multichannel Mix??

SPDIF Output 2 goes to D2 or D5 on the IE42 Board and equals Channels Rear Left and Right of the Multichannel Mix??

SPDIF Output 3 goes to D3 or D6 on the IE42 Board and equals Channels Centre and Sub of the Multichannel Mix??

And then you configure the Source on the 861/G68 to Expect a "Multichannel" Type Input??

Is this correct??

Is this also how the DVDUpGrades Mod is configured??

Last edited by RHurley; 2008-03-13 14:48.

-