Hi All:

After enjoying my 8ks for a few months, finally my DSP5200 arrived and I use it in my dining room, but it's having a very strange problem...

Day 1
Using MSR+ to set Left Master speaker to Left Slave and Right speaker to Master.
Hook up the Speaker with Pioneer 969 (US Spec Pioneer Elite DV-59AVi)
Plays fine and works wonderfully.

Day 2
Came back from Work. Turn on the speakers from “stand by” and started the player. No sound from Left speaker.
So I setup the left speaker to “Right” “Master” and “Left” “Master”, connect the player directly. Still no sound. (By doing this it means it's not the left or right channel problem)
Though the display screen clearly shows “PCM 44K” when the CD is playing, and “PCM NL” when not playing. (This should mean the DSP board is working and having incoming signal)
I can still hear a small hiss from three drives. (Should mean the power amp is also working)
I even change the player from Pioneer to Toshiba SD-9200 (Which was serving my 8ks without any problem), still same symptom.

Then I left the speaker off for about 15-20 mins it worked flawlessly after turned on (for about 30 sec).
So I set the speaker back to “Left” Slave” and connect with the right master speaker.
The system again works, fine. Then I turn off the DVD Player, but left the speakers on and went to sleep.

Day 3
After woke up, left speaker isn`t producing sound again.
So I tried to let it off for 1 hour, but this time the sound did not come back.
I turned on the Player and let it play. Sound only came out from right speaker, not left.
I tried lightly tapping the speaker at back, strangely the sound came out. Not for long, lasted for 2-3 mins, then went silent again. Tap again but miracle didn`t happen.

Day 5
Went away for two days, during the two days I unplugged the left speaker from power completely. When I came back home, it worked again!! But not for long.
Same problem, no sound from left again....

Day 6
A friend who studied Electronics came to my house have a small check.
And this time the left speaker weren't letting us down. It's working. However I need to show him that sometimes the left speaker can have problem. So I unplugged the SPDIF cable from Pioneer and plug into the Toshiba player. Whala.. Left sound is gone again.
He unplugged the main power (did not switch off from the back) and the SPDIF cable, then plugged them back, and I switch the cable back from Toshiba to Pioneer.
Sound came alive again...
And after that instance, the speaker keeps on working until now. Even when the speaker out from standby, or I turn off the main switch at back. The left is just back to work!!


So what can be the problem??? Anyone have a suggestion? cry

PS I live in Taiwan and purchased this from US. Therefore making the servicing very troublesome... So it would be good to identify the exact problem. If it's something wrong with the board, then US can ship me the module to replace. So please let me know your thoughts.


Current System: Toshiba SD-9200 --> DSP-8000
Secondary System: Pioneer DV969 --> DSP-5200