Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems Treble tilt to compensate for microperf screen

I also once raised this issue as a pre-destined issue for the 861 room correction. Should the room correction board ever see the daylight, it should be switchable to "on/off" in any preset. It would even be better to have 3 curves as well as "on/off" for each preset. That way one could do one correction curve with the screen as 1) and a second curve as 2) for "without screen", if you want to listen to music and roll up the screen for it. "Off" would be cool for demonstrations without room correction. You can do two presets one with and one without the correction to show off the supiority of Meridian....

Maybe you are a 568 owner, then of course the options will be limited.

How far away is your tweeter from the screen ? Is your room rather "live" sounding (little furniture and /or wood floor/ or alot of free walls and hard surfaces/ big windows)?

How large is your screen ?

Cheers,
Andreas



[This message has been edited by Andreas (edited 02-28-2002).]