Quote
Originally posted by evdberg:
Personally I find all this jitter talk FUD. I am pretty confident that any DIY solution to take the PCM stream made by the mentioned 'hardware guy' will blow away DTS easily.

Getting SPDIF from the HD-A1 is dead simple, just tap the signal before the DAC. We already located possible tappoints. I didn't say that we would tap the HDMI signal, since that is impossible due to the encryption.

And jitter on HDMI is no problem at all. As the receiver has clocked the signal into its memory, the data is recovered and any jitter is of no consequence whatsoever anymore.
It's easy if the DAC isn't INSIDE another chip. Or the traces are not so small you can't even see the spacing between them with the naked eye. Or the pins for chip are under it and going to traces on center layers in the board.

Unless you have a Meridian Controller with MHR input (3xSPDIF) it very likely will be a nightmare controlling volume on all the speakers.

Try comparing a MP3 at say 320kbs and Lossless and see if you can hear the difference. Be honest with yourself. Because that is about the difference you'll get.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2