At the Meridian Q&A, I questioned Bob Stuart on the choice of digital rather than analogue amplification in the G95. Furthermore, I asked why they had chosen that particular type of digital amplification over that, say, of ICE. Was it simply that they didn't want to pay royalties to B&O? The third part of my question queried on the extent to which such digital amplification would find its way into other Meridian products.

His response was that the smaller form factor of the G95, and the power output required, suited digital amplification. It will also run cool at sustained levels of output as a consequence - this suiting enclosed locations. At 6ohmns output, the G95 is capable of producing 150watts per channel.

As we all witnessed for outselves, Meridian don't source components for their products from outside. They designed and produce the digital amplification inside the G95. They had tested between several choices in digital amplification, and believe the design eventually chosen for the G95 is far superior to the ICE design - well, they would, wouldn't they?

Furthermore, Bob Stuart stated that although the G95 contained digital amplification this did not mean that other Meridian products would similarly follow the same route.

For me, the one dissappointment is you can't connect analogue and digital loudspeakers in seperate zones - as confirmed by Des Ford. Ideally, I wanted to run home-cinema from my plasma-in-the-corner in my living-room in one zone while assigning a second zone to DSP's for serious music listening in the same room (sigh).


Not an Actor, nor married to Jamie-Lee Curtis.

#1: DSP5200SE|DSW.2|218|210|506.2|504
#2: Prime/PSU|SOtM sMS-200 Mini NEO SE|Focal Stellia
#3: Other stuff