If I understand the question correctly, the answer is probably "neither". From the Meridian 568 manual (as an example): "For correct THX reproduction you should adjust each speaker to 75dB SPL using an SPL meter. Even if your speakers are not THX approved this setting is recommended. If you have Meridian DSP loudspeakers they cannot be set above +0dB."
In my bedroom setup (DSP5000 L+R, DSP5000C, DSP33 rear surrounds) I have -4.5, -8.5, and -5.0, respectively. This is based on measurements at my listening position. The distances are 8' for front L/C/R and 5' for the rears.
[This message has been edited by tkennedy (edited 12-17-2001).]