Now my brain hurts.
I've just got my 596 BNC version and in the video menu the choices are S Video, Component, RGB and RGB Sep Sync. Does this mean a previous owner has done the above hack? Can I get one of the 3xBNC to scart leads to work without any scary messing with it's memory?
I had intended to use the S-VHS output for now to connect to a 541 (thats the cables I've got) but as noted somewhere else on this subject the S-VHS output is greyscale! I've got it working with a cheep cable using the composite out. Would I find any improvement with the S-VHS out? If so how do I get my colour back?
The firmware is version 1.1 what are the benefits of upgrading it and if I do will I lose the RGB output option?
Last question, I cannot get the 596 to respond to the MSR "setup" command while it's connected to the 541 by the comms cable. What am I doing wrong. It responds to the standard play/stop type commands. In this system I only have the 596 and 541, would it be easier to just ditch the comms cable? What would I lose?
Many thanks for your advice
Richard
Main system; 861v8 ID41, DSP8000SEU fronts with DSP5500 centre and DSP7000 rears (all in lovely silver) 504, HD621 Second system 861v4 ID40 LPS, G98DH, 504, HD621, 2x DSP5200 with DSP5200 centre MD600 tucked away in study. Lots of other Meridian!
|