Imho DSP5200 are the ones to get. They have the transparent character of the DSP7k in the midrange and top end. I have the DSP5k as surround speakers.

I run the DSP5200LR and HC crossed over to the sub @53Hz. If I had two subs I would cross them over higher, because the horizontal center could use more relief. But my placement of the subwoofer has a dip starting above 55Hz+ or so that is why the sub takes care of 53Hz and below.

For music listening the DSP5200 are very potent in the bass. You could run them by themselves. For Trifield I would let a horizontal center be crossed with a SW1600.

For movies the DSP5200 really shines with a SW1600 (or two smile

In my room one single SW1600 is more than enough for movies. I can run Matrix 3 at 0 and when those drillers come crashing down the bass just keeps pounding you silly. There's no end to it laugh

I HIGHLY recommend these speakers!

I have put them on townshend audio seismic sinks that suspends them on an air pillow and they just breathe transparency, authority and control.
Townshend Audio Speaker platforms

For cost reasons the SW1600 Subwoofer is suspended from the floor with 4 Solid Tech Disc of Silence.
Solid Tech Disc of Silence


DSP8000SE, DSP7200SEHC, DSP5200SE sides, DSP7200SE rears, 861v8, 210, Sim2 Ultranero 4, Stewart Cinecurve 2.35:1, XEIT CM-5E Anamorphic lens, Dune HD Duo Cinema 8K and Wireworld Platinum 48G HDMI -> UHD722 -> Shunyata Omega Ethernet. Shunyata/Furutech power-cables/filters. SR Master Fuse@861v8. Uptone Etherregen with 10MHz OCXO clock.