Originally posted by DJones1915:
George,
What tests do you suggest using only one speaker?
If you still have the G91, I would do this.
Buy a Radio Shack Analog SPL Meter (or digital if analog not available).
Buy a Video Essentials DVD (make sure it's the latest version).
You want both these in your tool box no matter what system you end up with.
Set up the 1 Speaker as a center (or Front Left).
"Type" the D6000 to type 6. If you don't know what that means read the manual (manuals are on line). This will reset it to factory. It should be a "Left Master" (which is default).
Reset the G91 to factory. "Type it" using front panel. Read manual for details. That will set it to factory.
You may have to set it up as stereo as the minimum config.
Do not use the 518.
I assume you have a DVD player.
When configuring the G91, you have to tell the system your speaker is NOT 24/96.
Calibrate the 1 speaker using the SPL Meter. See manual for doing this or search other threads.
Sit a reasonable distance from speakers (12-14 feet is typical, 20 Feet is probably too much, depends on room).
Report the offset results back.
Once calibrated put in the DVD Essentials Disk. Play the pink noise test for the front left speaker and verify it with the Radio Shack Meter.
I think if you are running 1 speaker that will eliminate any low power issues.
System will not please your level of listening since there is only 1 speaker, so I would not listen with your ears on any tests.
You might run a frequency sweep. I forget if DVD essentials has this on their. If not you can probably download one or by a CD with it. Use the Meter to measure. This may help you determine if a driver if bad.
That should keep you busy for very little while for less than $100.00 !!!