Hi

I have just set up a Denon 3910 with a pair of DSp5500's and I've found that the digital output is rather low compared to the 800. The 5.5k's need to be run at 70 to output the same as 61 from the 800 according to my meter. Bearing in mind that every 9db is a double of volume thats quite a difference in output level. So I guess it would be quite feasible to run them up at 90 from my Denon DVD player without my ears staring to bleed as they would be doing with the 800 at that level in my room.
Saying that there must be a problem if they are clipping at 75. I would imagine that if the problem was there when you purchased them and you did not tell Meridian they would not have known anything was amiss.
Meridian may change the DAC's but I'm pretty sure everything else is more or less left untouched. They don't change the drivers thats for sure. I'm sure that when they tested them they would have no need to run them at 75 or above or Meridian would be paying out a lot of compensation for deaf tec's in the future!

Regards Paul