2 Meridian techs, 1 Area Salesman, 1 Dealer listened to the upgraded speakers today and said that my room is too "open" (family room with 3 walls and an opening to a sun room and kitchen) and that the DSP6000's going into "protective mode" is what they are suppossed to do. I need 7000's to be able to listen to them at my desired volume level in my room. They removed my upgrades (because it is not prudent to spend $5,000 upgrading them when they will not play at mt desired volume) and put back my old D6000 boards.
Then they did not work (the master speaker had a major "buzzing" that none of them could fix)! So now, they took one of my D6000s to send it to Atlanta. They say there will be no cost to me.
Bottom Line: If you have a room that is not professionally set up (like most normal humans), you cannot have DSP6000's (96/24 or 48/16) and expect to play them at volume higher than 75 without them going into protective mode?
I'll bet there is not one dealer out there that would tell this to a potential buyer. You can pay $23,000 for brand new DSP6000s (yes, Meridian will still make 6000's if requested), but they won't play long at any volume higher than 75 unless you have an enclosed, acoustically appropriate room?
I did have them hooked up to a Furman IT Reference 15 whereas the 6000''s require 20?
Is the Meridian world really this complicated?