Hi Snowflake;

If you look at the 568.2 Manual page 69 it will tell you how to connect a 568 with a 562.

You do need to set all the inputs on the 562 to the correct input or to last valid..

The 568 should be the controller with the 596 and the 562 being not controllers.

If you set everything to auto and press clear on the remote with 5C leads connected you should see controller on the568 and NCon on the other 2 devices.

If you have any other issues feel free to call.

Marc


Marc Koval
The Repair Shop
404-542-4902
marc<at>the-repair-shop.com
https://www.the-repair-shop.com/