You need to take a step back and, as Mr Meridian says, configure the 562 and 568 separately.

I'd start with the 562 (turn the 568 off) and configure the sources (including inputs and comms) as you want them to respond to the MSR and disable any sources you don't want. Then do the same for the 568 (with the 562 off). Obviously, you'll have a reduced set of inputs when you configure the 568 (D1 and A1 as you have stated).

Good luck.


Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.